My VS Project, please leave me some feedback.
Check out my other car in the garage too.(click my member id to get there)
I have installed a sc14 supercharger kit for my VS-S2 V6, then have had a smaller pulley put on it which now blows between 8-9psi constant, proven by dyno. Have also relocated the throttle body to the front of the blower with custom brackets. Put Pacemaker headers flowing thru a modified cat with enlarged openings to match the straight thru 3" turbo exhaust. Modified rebuilt Auto with stage 2 shift kit and reconditioned TC. Added Koni Adj suspension with SS-low King Springs with nolathane rubbers, Whiteline panhard rod and front and rear nolathane strut braces. My car now produces 744.7 ft/lb of torque, 305 HP at the fly and 241 RWHP at 4500 rpm 110mph. Inlet temps could be a lot lower so once intercooled should be expecting a bit more power.
Now it sounds and drives like a stok V8 when your jus crusing around cant really hear the SC but feels strong when you floor it BOOM boost hits 8psi straight away and the car accelerates HARDDDDDD and the whizz is noticable! nothing like what it did sound like. From stand still it will smoke the tires silly all way thru 1st and into 2nd your going about 70km befor it grips which is great if you luv to drift!!!!
reving it at idle it hits red line almost instantly.
Great fun to drive ;)
Now installed screen into dash
Next thing to do is add an intercooler.
My current mods are:
*CRS SC-14 modified Supercharger boosting @ 9 psi
*Supercharged Ecotec Injectors
*TBS dyno tuned memcal
*Custom relocated throttle body setup
*Pacemaker extractors thru to a straight thru 3" Cat back exchaust
*Modified Cat openings to match bigger exhaust
*Cold Air Setup but using K&N Pod not air box
*9mm Ignition Leads NGK SC Sparkies
*Custom Coil Pack Relocation
*Modified and rebuilt Auto with stage 2 shift kit
*Standard VS Ute LSD
*Koni Adjustable Shocks With Super Super Low King Springs
*Nolathane Front and Rear Strut Braces
*Whiteline Panhard Rod
*Nolathane rubbers all way round
*18" Enkei Gzero Mags
*Bendix Ultimate Pads
*Brigestone rubbers
*VX Clubsport Fabtech BodyKit
*Group A Bonnet Lift
*Removed all door moldings
*Handbrake pads constantly changing ;)
*Stereo is a CARPC 1.2ghz Mini ITX (WinXP media Cen)Running Roadrunner as default shell with sat nav, mp3, vid, psx, n64, Ob Diagnostics. all running thru a 7" touch screen and Opus 90watt power sup, with auto standby, on/off via ignition.
Size Of M-Board is 15cm by 15cm
*2X Pioneer GM3200 300watt amps
*1X Boss 500watt amp
*Pioneer 250w Comp front speakers
*Panasonic 150w rear speakers
*12" Sony Xplod Sub
Another example of a skin
