Updated Final Results
My other Hifonics sub amp was not the correct amp for my setup. I ended up getting a Rockford Fosgate Punch P6001. This amp puts out 600 Watts @ 2 ohms. I ran the JL 12W6V2 coils in parallel at 2 ohms also. This thing hits so hard I had to turn the gain down.
Here's the back end. Since the wires come out the front instead of the side of the amp, I mounted it backwards to clean up the front. Notice the 4 gauge power wire to feed the amp.
Here's the remote bass controller mounted in a nice spot.
The Peel & Seal works fairly well. I can turn it up quite a bit and let it really thump on the inside of the car. If i get out and shut the door it's fairly quiet on the outside from what you would expect. It's def the poor man's dynamat.
Let me know what you think. Any comments or questions would be nice. I have dimensions or more pictures if anyone needs them.
Page 1: My Car
Page 2: Original System
Page 3: New Trunk Floor
Page 4: Sound Deadening the Trunk
Page 5: Sound Deadening the Doors
Page 6: Sound Deadening the Cabin
Page 7: Sub Box and Amp Rack
Page 8: Installation
Page 9: Finished Result
Page 10: Updated Finished Results
