HERES THE LIST OF MODS TO BE DONE THIS WINTER SOME ARE COMPLETED ALREADY.

-shaved door handle, gas filler, and all body lines.
-lambo doors. (DONE)
-the stock es pannels are be modified for more of a body kit look.
-custom cowl hood
-rebuilt dash from scratch (fibreglass)
-more fiberglass work to mount numerous amount of monitors
-DOHC TWIN TURBO engine swap ( IN PROGRESS)
-nitrous
-tail lights mounted to air cylinders to slide back to reveal the gas filler / aux inputs (DONE)
-hideaway rear license plate (DONE)
-New rims 19 or 20 if i do some cutting
-second batery
-new paint air brushed inside and out.
THATS MOST OF THEM THERE ALOT OF LIL DETAILS I LEFT OUT

well i got some updated pics of my winter mods ill keep updating them as i work on them

heres some pics of the tail lights which i have placed my order for air cylinders to pop them out away from the car to gain access to my fuel filler and on the other side im placing an air quick connect and 120v plug in for those times you jsut want to plug somthing in lol.

heres spme pics of the new fuel filler alot of bends but it seems to tuck away nicly under the car. the one pic shows my dual exhuast set up i will take a better pic of how i set it up and post it real soon.

i need to get some pics of everything. but here where i sit with my mods. the rear tail lihgt drction oin almost complete i just need a set of lights becuase i damaged one set. but the gas filler is mounted and the air cylinder will be mounted once i get the tail lights. the rear monitor behind the license plate is complete jeust need to hook the valve system up for the cyliner.

started work on my body kit. started with the front bumper. raised the rear of the car and lowered to the front then mounted the bottom lip 1/2" off the ground all the way around. i cut the stock bumper out leavign the center open and also stretched the over all hight of it. opend up the sides with evo style fog lights and intake vent along with a brake vent on the sides. everythign will be fiberglassed togethet once i mount my lambo doors and put my fenders back on. over all it looks amzing i am realy pleased how its shaping out. ill be posting pics really soon. plan on mounting the lambo doors next weekend to allow me to mold all my front end together.
im using air cyliners also to automat the doors. hopfully by mid december all body mods will be complete and be able to prime and get it readt for paint. also allowing me to start my custom dash. and figure out where to mount 14 monitors.

for now keep checking the site ill try to post pics of everything this week.

i have to run it inside the car but i am making a pannel to cover it and seal it off from the inside.

heres a pic of my new hidaway license plate set up. i fiberglassed a section where the reverse lights are normaly and mounts a monitor. the lisence plate it self is on slides that will pop up or down with an air cylinder. dosnt look like much at the moment until i get the new reverse lights mounted and finish the fiberglass work

heres the hide away plate part way up works good and will be sweet once i fiber glass the monitor in behind

a shot of the fiberglassed tail light housing

i am building custom tail lights using LED but using the stock shape just the lights them selves will be thinner to make more room and be clear for more of a euro tail light look.

i have a video of the tail lights being pushed out from the car using the air cylinders but my computer is down soo when i get it back ill post it up.

heres some pics of the front bumper rough design and a few other photos of the prgress mad so far.

and es the front bumper is on the ground now when i slam the front and leave the rear up.

heres a few pics of the tail light assembly. i modfied the tail lights to be seperated into three parts so that the psg and drive sides can slide back away from the car using aircylinders gaining the access off gass filler and power outlits. ill post a video soon. also the tail light housing is now one peice and the hatch key lock has been shaved.

ok Lambo doors have been started the hinges were supose to be here today Nov 23 2005 but they didnt show up. soo i got started and have the door ready to mount them once they arrive. i had to remove the door and grind off the upper hinge bracket off the door and also remove the fenders i left the bottom hinge on so that my door could be set back inplace once i weld the lambo hinge on. once on i will unbolt them and cut them off. heres the pics

before and after

just some pics with the doors removed

Not much room between the tire and the frame looks like i might have some chopping to fit 20" rims lol

***************************************************************

Dec 11

just came back from the shop from putting the last few coats of fiberglass on my rear bumper. its ready to have its final sanding and a thin layer of bondo and final block sanding. i hope to have it ready for primer by the 15th. then hopfully my lambo hinges will show up so i can get the front put back together. over all its going smoothly and the over all look of the car is still stock with just a few new lines to clean it up and make it look unique.

i got sponsored by Clarion Audio and am waiting till Feb for there new 2006 line up. ill miss my 9500 subs but they will sound good in my truck lol.

i shaved the door handles off using Autolocs system with 12 function remote. works great only if i had my frigin hinges. ill take the camera out to the shop and get a few photos and update this site someday i have time. also i shaved the line between the side and roof makes it look alot cleaner!!

a shot before and after.

ok heres some pics of the rear bumper.

damn the new lines look good i startd work on my new side skirts today dec 27 2005 i got to lower them 2 inches so they will sit on the ground!! ill post pic when i can.

here some pics of the front fender jsut in the rough stage and also a pic of the 18" rims