PAGE 1= Before/After exterior overview
PAGE 2= Interior
PAGE 3= Paint Work
PAGE 4= PHOTOSHOOT OF GIRLFRIEND ON TRUCK
PAGE 5= Recent Updates
This is my Red 2002 Silverado I got dropped with a 4"6" djm kit. I did this back in 2003. It's bagged now. Keep following along on the pages and you'll see the work
That was before.........now here is the after shots of my truck on bags. I also put on my new Sumitomo 255/35R20's. Now it lays hard on the frame. Again...this info is old news. I now roll on Liquid Metal Lithium 6 22's with 265/30's
Okay so I got the roll pan and stake holes welded on and the bed repainted. It all looks real clean and smooth.
Here's the basic list of the setup:
Firestone 2600's
Exstensive Metalworks rear notch kit (Cantilever, 2-link type setup)
1/2 valves
1/2 lines
Dual Needle gauges
2-5 gallon tanks
2 VIAIR 450cc compressors
10-switch box
The front lays with a custom setup using my 4 inch drop control arms i had from my previous DJM drop kit.
