Posted by: nesty427

02/19/2006 04:03PM

NICE RIDE LOOKS CLEAN. CHECK OUT MY RIDE I JUST ADDED NEW PICTURES TODAY OF THE NEW SYSTEM COME CHECK THEM OUT AND RATE MY RIDE

Posted by: ducatirr

03/17/2005 03:38PM

Hey good luck this weekend. About the speakers in the doors. Just take a thin flat head screw driver and pull the speaker guard off. You might have to work it all the way around but its just a cover and it comes right off. I think the speakers are 6 1/2. Good luck. Keep me informed. Rascal

Posted by: ducatirr

03/15/2005 04:47PM

Hey hows it going. To do your clear corners all you need is a long flat tip screw driver a hammer and some needle nose pliers. First you have to take the whole light assembly out. Then take out all of your lights. The hole that the signal bulb came out of is what you are looking for. Take the hammer and screw driver and tap on it easily so that the amber lense on the inside starts to crack. When it starts to break up pull the piece out with the pliers or if the pieces are small enough you can just turn the light assembly tword the ground and let them fall out. Thats about it for that. About the instrument panel. You have to take the cover off of the stereo panel first and look for the screws. Take them out and the rest of the dash just clips on. After that there are for screws on the instrument panel you will need to take out. Once they are out there are several small screws to take out. Once they are out. The gage bezel comes off. Just stick your sticker through one of the big holes and then take off the backing to the carbon fiber sticker. The glow gages are a little more difficult because you have to take your needles off to get the gages on there. You also have to find the wire that connects to the lights when you turn them on or else your gages will be on all the time. When you purchase the gages it gives a detailed instructions on what to do. If you need anything else just e-mail me. I updated my car with intracks lowering springs. I dropped it two inches. I also added a sirius satelite system. I just haven't put the pictures on there yet. But I'll have them on there this week sometime. Check it out. Rascal

Posted by: BlackStratus

03/02/2005 06:49PM

wow 70 us ..i paid 5 cdn Lol...but yeah select the outline of the car...then click copy and paste..this should make a copy of only the car then after u have that u go and change variatons ....u have to work aroudn with it and u might need different layers to get a colour right... also adjust the opacity to work with the colour .... it takes a whiel to get it right... so spend a few hours just playing around with the colours.... pick a colour and then try to copy it....DO NOT USE THE AIRBRUSH

Posted by: BlackStratus

02/23/2005 03:13PM

hey its really easy... i learned byplayin around with it...u paid for it??? damn lOl that musta cost alot... well whateva u need to know ask away