Well I finaly got to start getting my car ready for paint. This is the sanding step. I first have to sand everything down with a 500 grit sand paper just to "scuff" thigns up a little bit. the hardest part is not getting too deep on some of the spots, as u can tell I got a little deep just a few times. I found it very usefull to use a 6" air disk sander. It made things go alot faster than what it would by hand. I still have to sand the edges and a few minor things like the mirrors. Then I will get to start the long procces of taping everything off that I don't want the primer on. Well here are the pictures. :) enjoy!