Page 1
Page 2 Blue Angels & misc. pics
Page 3 music video shoot
Mustang Steve.com Feb. 08 Calendar Pic
CJ Pony Parts May 08 Calendar Pic
Dark Moss Green 67 Fastback. 347 stroker, 4 speed automatic, 8"x16" Bullit style polished aluminum wheels, 225/55/16's front, 245/50/16's rear.
Custom billet aluminum center caps with Shelby logo on steering wheel and wheels, made by my buddy Chris.
347 all roller.
Balanced and zero decked with Probe forged flat top pistons, 3.4" stroke Scat Crank and Rods, FMS windage tray.
Edelbrock Performer RPM roller cam (227/234 @.50, .520/.520 lift), FMS roller lifters, Crane roller rockers and pushrods.
Edelbrock Performer RPM aluminum heads and Edelbrock Performer RPM Air Gap manifold, (port matched, blended, deburred, polished chambers), Speed Demon 750 carb, K&N air filter, 6an aluminum tube and braided stainless fuel line, pan evacuation system.
MSD 6AL ignition box, Mallory Comp SS distributor, 8 mm ignition wires.
Milodon aluminum high flow water pump and high flow thermostat, Afco 2 pass crossflow aluminum radiator, custom shroud with Perma-Cool 2950 cfm. electric fan with adjustable temperature control.
Hooker ceramic competion headers, 2.5" mandrel bent exhaust with H pipe.
Vintage Air installed on an original AC car (pita).
AOD four speed overdrive automatic trans. with B&M shift kit. Stacked plate cooler with 900cfm electric fan.
Check out the throttle linkage I made. I used two 1/4" rod ends and a 1/4" aluminum rod.
Cylinders notched for connecting rods with 3.4" stroke crank.
Performer Rpm head after deburring Chamber and ports.
8" rebuilt and painted, with 3.80 gears and No Slip locker.
New springs, Monroe shocks, 3/4" rear sway bar, under rider traction bars, subframe connectors.
Some awards my car has won.
Unisteer power rack & pinion, Shelby drop with 1/8" set back, Opentracker roller spring perchs, KYB shocks, Global West tubular lower control arms, TCP strut rods, 1" sway bar.
Lots of header clearance.
Lower control arm mount clearanced for mounting bracket for rack, just grind lip of bracket to clear mount.
Just installed TCP upper control arms. You can also see the new fuel line and filter.
Custom shroud with Perma-Cool 2950 cfm. electric fan with adjustable temperature control. Page 2 has a few more pics of fan and shroud.
Just made and installed a fill panel between grill and radiator support.
Just installed two new Lokar dipsticks.
Page 2 has pics of my Autometer Ultralight guages.
