Flamin out the hood, and PSC Rocker Knockers
Page added 3/18/2005
Well, I wanted to do a little something different. So, I call my friend Ricky, owner of Inferno Designs, and said, "Hey, lets flame my hood out." He can flame anything. Here he is starting to lay em out.
Here is the finished layout, all done by hand with 3M 1/8" blue tape.
All masked off, and ready to shoot.
Here is Ricky, shootin on the black base. We used ChromaBase gloss black, nothing fancy, but it goes with the rest of the Jeep.
All finished. Cleared and unmasked.
This is an overhead shot showing the layout.
And that's it. Now I just have to let it cure, and wetsand and blend it in a bit.
Here are the PSC Rocker Knockers, finally got them on.
These were quite a treat to install. You have to unbolt all the body mounts, jack the body up off the frame, and trim the back 2 center body mounts, because these sandwich between the body mounts and the body. Great coverage though.
Also, a little something different. I grabbed a piece of silver vynal from a friends shop, and put a square of it behind the cut out PSC logo, just to set if off and make it stand out a bit more.
More to come soon!
DIRECTORY:
*page 1 - Intro & details
*page 2 - stock pics. removing bling
*page 3 - small 2" lift. front bumper fabrication. bumper and winch installed.
*page 4 - Suspension install
*page 5 - Driveway Flex
*page 6 - Hood Flames & PSC Rockers~>you are here
*page 7 - Action shots (Paragon 3/19)
*page 8 - 8.8 Axle swap **NEW**
