Probinator ZE Chips.. 1st gen Chips info on 2nd Page...
THE ONLY CHIP THAT WILL GUARENTEE SATISFACTION OR YOUR MONEY BACK. DONT BE FOOLED BY EBAY OR OTHER KNOCKOFF CHIPS. THIS CHIP WILL ONLY WORK WITH THE KLZE MOTOR, OR THE KL03 BLOCK WITH ZE MANIFOLD. "Please specify if you only have the manifold as its 2 different chips"
This is an EPROM for a Mazda MX-6, Ford Probe, Mazda 626 or Mazda MX-3 with a KLZE engine. As many people know there is not much aftermarket support for our cars, so all this is another SUCCESSFUL attempt of a car enthusiast making a new product for his own car, and being very happy with the end results. And now we would like to offer this as a product you can buy and install and get instant HP/TRQ for your KLZE motor.
How it all started....
I have been working with a guy locally that does ECU Eprom chips for other car makes and models, and I asked if he could make a Chip for me. I have a KLZE with the stock A-Spec ECU. We all know that the stock ecu is not made to run the KLZE motors. I noticed that some Eprom's were running close to 150.00 Bucks and up. I noticed that there was a file going around here online and when I received it, I gave it to him. He told me that the file I had was missing allot of data, and after running my car on an emulator and him tweaking a few things he had a chip ready for me. He owns a shop and he was like let see what this thing can do, he put me up on his SuperFlow WinDyn Dyno. At first I was like damn, this guy just wants to blow my Ford Probe up. I put the chip in and everything Idled great and just with a couple of passes down the street, I knew the VRIS points are working well now. It felt awesome. Also no more Check Engine light, that I had for the EGR. Well I wanted to do a couple of runs. I had my hands on a actual KL36 with je50vaf too for the dyno, I have dyno sheets with a baseline run, The klze eprom, and a kl36 ECU with Jevaf50. All I can say at this time is that I made 7whp over stock, With the File he used he eliminated the need for the je50vaf and eliminated the speed sensor. I wanted everyone out there that has a KLZE to enjoy the extra power that I got out of my Eprom, and asked the guy if he was willing to do a few extra on the side. He stated no problem, and then I started to sell them.
-In a nut shell here is what the Chip will do for you.
- Eliminate the need of a JE-50 VAF
- Eliminate the worry of having a 115 MPH speed limiter
- Eliminate the check engine light for code 16 (EGR System)
- Provide the correct VRIS points for a KLZE straight neck
- Provide you with a more aggressive fuel/timing map
COST WILL BE 45 shipped and I ship USPS. If your in the states shipping is usually 2-5 business days depending where your at. If you're out of the country please pm me on the forums or email me with your shipping info. Keep in mind. Shipping out of the states can take up to 2-3 weeks to arrive to your location as I only ship once a week INTERNATIONAL also due to usps and customs.
WE ALSO INSTALL THE CHIPS FOR $45.00 I RECCOMEND THIS IF YOU ARE NOT FAMILIAR WITH SOLDERING. EMAIL ME IF YOU WANT TO SEND IN YOUR ECU. IF SENDING IN YOUR ECU MAKE SURE TO WRITE YOUR NAME AND ADDRESS ON THE ECU. AGAIN INTERNATIONAL WILL TAKE LONGER.
WE OFFER 100% SATISFACTION ON THE INSTALL AND THE CHIP.
Any questions please feel free to email me at probegtze@hotmail.com
I accept paypal Or money order. Email me if you want to send a money order. or my paypal address is probegtze@hotmail.com
Cost is 45.00 Shipped within the U.S
Picture of dyno
Chip install instructions
