Recoverd PMD seats

Here are a few pics of the rear carpet installed.

Passenger carpet installed along with the center console. The last picture shows location of components that will be placed under the drivers seast

A few shots of the drivers PMD seat installed. The back of the seat still needs to be recovered before it gets installed back onto the seat.

Now here are the pics of the entire interior put back into the car. The excess wires in the back are for future stereo components and also an auxilary battery to help power the extra electronics added into the car.

I also got working on my lower console as well. Getting it ready for paint, would have painted it but it is too cold to paint right now, and also fabricated a braket to hold the console in place. I got the idea for a friend of mine on how he mounted his. I did the bracket a little different than his but I still got the idea from him. Thanks Jeremiah.

Here is the bracket that I made

Here is a pic of it installed so you can get a better idea on what the braket mounts to on the console

I just received one of the major parts of a KITT replica. I finally got my dash. It is an empty dash, no electronics, but at least I have a dash now. I went with a 1 tv dash from Marks Custom Kits out of florida. It came packaged very well. Here are a couple pics of how it was shipped to me.

Box full of packing peanuts

I did get it pulled out and did a mock up of it in the car to see how it looked.



Doesnt look to bad.

I did get a tv bezel from Mark as well so I can use that to make my own tv bezel for my tv.

Here is out if fits in the car compared to the door panels and the front windshield

Since the tv area rests on the support of the lower console I had to add a couple nuts to the top of mine to see how much more I have to add to the top of the support so it fits the dash just right.

I did get the voice box area cleaned up enough for my voice box to fit in but the holes will have to be redone. They were done by mark but I have Christians voice box and the holes dont line up te best for the top led's. You can see from the pic that it doesn't fit in there just right.

The tv area was cut out next to accomidate my 8 ince widescreen tv. It still needs a little work. Just some cleaning up to match up with the tv bezel. First pic is without the tv in it and the second one is with me holding the tv inplace. Still need to make mounting tabs to hold the tv in place.

I also got an 8 inch touchscreen as well to go in the car. I like the 1 tv dash but I decided I wanted 2 screens in the car. I was thinking of molding it into the upperconsle but as a friend pointed out to me I would be blocking my view to the passenger side out the window so I had to find a different place where I could see it and have access to it. I figured I would have it sit off the side of the lower console. I dont think it looks too bad right there and I will have access to it very easily. Here are a couple pics of it just mocked up in place.

I did get the holes drilled out by the top vets to hold it in place now I just need to make some metal mounting brackets up by the front corners to hold the front down and in place. Still have some more work to do with it before it will be ready for paint but hopefully will get it done soon so I can get it mounted in the car. One last pic from the outside looking it.

I had a friend finish up my dash. The only thing that really need some work was the voice box area. The holes didn't match up with the led's on the voice box. Here is the work he did on it.

As you can see he did one hell of a job and it looks awesome.

Now come the time for paint. It is being painted just like my steering wheel. Black with Viper Red accents.
Here is the red going on.

Now masking off what will stay red.

Now time to unveil it with the black and red on it.

Here is is with a shot of clear on it.

Next pics to come will be when i get it home and insalled in the car. Can't wait.

Here is the rest of the pictures of the dash.

Here is my new nose that I just installed. Needs some work but i like this one better

Got my voice box installed into the dash.

Got a new tv for my car. Replaced the pioneer TV that I had with a new Alpine touch screen TV. Much better quality

Page 1 Car shows
Page 2 Pillar Pod Install
Page 3 Speaker Pod Build
Page 4 Die Cast Car Collection
Page 5 Lower New Lower console and Steering Wheel
Page 6 Cruise to the Woods
Page 7 Spring Fling and Saturn Car show
Page 8 Interior Overhaul
Page 9 Random Pics
Page 10 Lower Console Overhaul
Page 11 Spring Fling 2008