complete list of mods:

ENGINE:
-306 ci, 30k mile 302 5.0L block, .030 overbore magnafluxed and bead blasted, 30k mile stock crank unturned, 30k mile stock rods, Speed-Pro .030 over forged pistons w/ coated sleeves, clevite piston rings, cam, main and rod bearings, new freeze plugs.
-Wolverine WG-1087 cam,(222/232 @ .050), 510/534 lift, 112 lobe center
-World Products Jr. aluminum heads, 2.00/1.60 stainless valves,
Stage 2 ported intake and exhaust ports, blended and polished bowls all by Coast Performance, 5 angle valve job, Crane high lift springs and freshened by H.B.R, flow 255cfm at .500 lift.
-Comp 1.6 ratio 7/16 stud mount adj. rockers.
-CHM hardened one-piece chromoly push rods 6.250 length
-Comp Cams hardened guide plates
-Cloyes double roller hardened timing chain.
-FMS heavy-duty oil pump shaft
-FMS roller lifters.
-CHM underdrive pulleys
-ARP 7/16 rocker studs.
-ARP head bolts
-ARP intake bolts
-ARP valve cover studs
-FMS graphite head gaskets
-Fel-Pro 1262 intake gaskets
-Fel-Pro rubber steel reinforced valve cover gaskets
-FMS polished tall valve covers.
-Moroso valve cover breathers
-Polygraphite motor mounts
-FMS A/C delete
-UPR timing pointer
-Romac SFI spec 50oz damper

INDUCTION/ EXHAUST:
-Edelbrock RPM air gap intake
-K&N 14� air cleaner
-MAC 1-5/8� longtubes
-MAC 2.5� off-road shorty h-pipe
-Flow-Master 2.5� 2 chamber mufflers
-SCE copper 3� collector gaskets
-SCE copper header gaskets

DRIVETRAIN/SUSPENTION:
-Tremec TKO transmission
-Pro-5.0 shifter
-Steeda adjustable clutch cable
-Steeda aluminum clutch quadrant
-Steeda firewall adjuster
-FMS aluminum drive shaft with 31 spline D&D yoke
-Lakewood driveshaft safety loop
-Centerforce 26 slpine dual friction clutch
-Prothane transmission cross-member bushing kit.
-Prothane strut, sway bar bushings.
-Prothane heavy-duty end link kit
-Tokico HP struts and shocks
-Jamex 2� progressive rate springs.
-Energy suspension urethane front spring isolators (uppers only)
-Prothane rear spring isolators
-Sub-frame connectors (welded on)
-Steeda aluminum lower control arms
-Steeda adjustable upper control arms
-FORD posi unit, brand new (not rebuilt)
-FMS 3.73 gears
-Urethane rear housing bushings
-Lincoln Mark VII 73mm stainless piston front calipers.
-EBC green stuff brake pads
-Russell Stainless caliper sleeves
-FMS 95 cobra master cylinder
-FMS 17x9 cobra R silver wheels, 235x45x17 front, 245x45x17 rear tires

IGNITION/FUEL
-FMS 9mm wires
-MSD blaster 3 coil
-MSD billet distributor w/ steel gear
-MSD 6AL ignition box
-Optima red top battery
-Taylor battery relocate kit w/ aluminum battery box
-3G 130 amp alternator
-March billet alternator bracket kit
-Holley 650 mechanical sec., chokeless, double pumper
-Mr. Gasket 2� aluminum carb spacer
-CSI carb throttle bracket
-Mallory 3 port adj. Return style Regulator w/ Autometer fuel pressure gauge
-Russell -AN fittings
-Russell -8 quick-lok feed line
-Russell -6 quick-lok return line
-Russell -10 tank to pump stainless feed line
-In-tank pickup -10 feed, -6 return
-Aeromotive street rod pump 150gph at 8psi
-South West Speed -8 fiber element in-line filter

COOLING
-FMS 2 core aluminum radiator.
-Steeda radiator hold down.
-Lincoln Mark VIII electric fan w/ 85amp Bosch heavy duty relay
-Mr. gasket 180-degree stat
-Moroso catch can.

INTERIOR/EXTERIOR
-Affordable Paint and Body acrylic/ clear coat paint job
-Steeda shift knob
-Steeda 4 piece billet aluminum pedal covers
-Steeda black floor mats
-Kaenen 4� fiberglass cowl hood
-6-pc clear headlight kit
-Super bright white headlight bulbs
-Acc complete molded carpet black.
-Black leather 96 cobra front seats
-Kenwood kdc-x715 flip face cd player.
-JBL components 6-1/2� subs, 2� tweeters, 2 way cross overs
-Pioneer 4-way 6x8� rear seat speakers
-MTX blue thunder 240watt 2 ch amp
-Dual Pioneer free air 500watt 12� subs,
-K-9 alarm with ignition kill, keyless entry, dual remotes
-UPR inner door handle billet aluminum bezels
-UPR power windows billet aluminum face plate
Autometer
Dual a-pillar pod
2-1/16� ultra-lite oil pressure
2-1/16� ultra-lite water temp