.
Alarm Install
Sensor unit: Toyota Part # 08586-04820
Glass break sensor & LED costs $150-180
---------White tape is holding connector to wire loom. cut it.
connect module to white connector
-----------------------installed
Last thing to do is disconnect connector under dash.
For more info check out this website:
http://www.customtacos.com/tech/index.php?page=index_v2&id=12&c=6
Test by locking doors with key or remote. Wait until LED flashes, then tap on window glass with key until alarm sounds.
If it doesn't, you might have to turn up the gain. To do this, first remove the left kick panel then you'll see a box mounted on the cab wall with 3 connectors on it. Just unplug them all unscrew the box and turn it over. Take a small flat head screwdriver and TURN UP THE ALARM SENSOR it should be set on a level five (5) just kick it up to like 12. I'm just passin on the info.
If the LED doesn't come on at all, you probably disconnected the wrong wire under the dash.
If you're broke & don't care about a glass sensor, you can do it for free, just look at the website above.
Page 1 -- truck pics
Page 2 -- Stereo system install pics & details
Page 3 -- Alarm install
Page 4 -- offroading pics
Page 5 -- Oregon Trail SCCA ProRally race
Page 6 -- Random pics of fun shit & videos
Page 7 -- Other Mods
