Ok well I have been having trouble with my digital camera but I finally got some new pics up of the last weeks worth of work! Progress is going steady and just makin sure everything gets done RIGHT not rushed.
I'll start out with the engine mounts we made. I did throw a 3/8" thick 1" round bushing in bewteen the two pieces of the engine mount. Check out how they turned out!!
Three days before GPG this year I was still doing large modifications and was forced to ride shotgun to yet another GP meet. :( I cut out the radiator support/frame rail for easier removal of the engine/trans combo
Here is how she sits as of 9/24 Damn that looks MAAAAAAIIINNNN!!!
Because of this motors dual overhead cam set I need to relocate the master cylinder to a higher placement to clear the cam carrier cover.
In this one it shows my master cylinder relocated.
In this picture it shows my steering angle modification and the coolant pipe redirected to face upwards.
Here are two pics, one of my power steering bracket and one of my alternator bracket that had to made.
My trunk is WELL on its way to completion. All that is left for the tank is the fuel lines with will be added when they are also added to the motor :) and then rubber fill tube to the tank from the stock gas tank fill spot on the outside of the car
Two more of this beautiful creation :)
Primed
Page 1 - Intro, parts list/description
Page 2 - Rear susp. removal, new rear end,
- gutting engine bay, new front susp.
- welding in front susp. for travel
Page 3 - Front susp. prep and travel
Page 4 - CUT IT UP!! and 79 Camaro stub attempt
Page 5 - Front susp. framing and fender building
Page 6 - Rear susp. control arm mounts and axel fitment/framing
Page 7 - Engine test fit and oil pan chop
Page 8 - New bellhousing and room for doghouse choppin
Page 9 - Engine, power steering and alternator mounts made
- Master cyl. and rod relocation, trunk/fuel cell
Page 10 - Shifter box and doghouse,lengthening wires across body
Page 11 - Front brake PC'ing, engine removal/ rad. support chop
Page 12 - Sheet metal protective plate and engine pics
Page 13 - Most B4U sanded, Instr.cluster, cooling lines/coils
Page 14 - Underside pics and clutch pics, radiator/cooling fans
Page 15 - Clutch, Powered up, engine cover and wiring fun!!
Enjoy!
