Alright here are some newer pics...

A little big of everything :)

This is the sway bar installed with dowels in the control arms for support

Gotta look up some info on the oil filter to see if anything runs through that open hole. You can also see my chopped oil pan and my "5 piece" sway bar

I switched the polarity of my cooling fans and put them in front of the radiator to leave more room in the engine bay

Driverside subframe connector and inline fuel pump and filter setup

Pass side subframe connector

NEW FLYWHEEL - Clutch coming soon

Page 1 - Intro, parts list/description
Page 2 - Rear susp. removal, new rear end,
- gutting engine bay, new front susp.
- welding in front susp. for travel
Page 3 - Front susp. prep and travel
Page 4 - CUT IT UP!! and 79 Camaro stub attempt
Page 5 - Front susp. framing and fender building
Page 6 - Rear susp. control arm mounts and axel fitment/framing
Page 7 - Engine test fit and oil pan chop
Page 8 - New bellhousing and room for doghouse choppin
Page 9 - Engine, power steering and alternator mounts made
- Master cyl. and rod relocation, trunk/fuel cell
Page 10 - Shifter box and doghouse,lengthening wires across body
Page 11 - Front brake PC'ing, engine removal/ rad. support chop
Page 12 - Sheet metal protective plate and engine pics
Page 13 - Most B4U sanded, Instr.cluster, cooling lines/coils
Page 14 - Underside pics and clutch pics, radiator/cooling fans
Page 15 - Clutch, Powered up, engine cover and wiring fun!!

Enjoy!