Sign My guest book and let me know what you think or if you have any questions.

1999 Mitsubishi Diamante 20% Black Onyx Tint all the way around.

Front view of car, notice the custom clear corners and custom chrome grille.

Closer view of the grille. Simple and easy install. Just buy chrome door guards and cut them to the size of the grille slats and slide thm over.

Closer view of the custom clear corners. No body makes custom parts for a Diamante so i make everything myself.

Parking light on with clear corner, im still looking to find plain white blubs so the corners.

Low beam, parking light and fog lights on.

Here is a how-to for the custom clear corners.

1. Take out the 6 plastic screws on the plastic cover in front of the radiator.
2. There should be 6 tabs for the grille, you need to unclip these and take the grille out.
3. Start by taking out the 2 bolts on top of the headlight and 4 on the side. (all are 10mm except the middle on the side, that�s 12mm Make sure to take out the parking light bulb, low beam and high beam bulb.
4. Now get on your back and go under the front bumper in front of the tire. There�s 2 bolts, 1 holds on the bumper and the other is for the headlight.
5. Take out the 3 screws on the quarter panel.
6. Pull the headlight out little by little, there are 2 clips that just pop out when u pull hard enough.
7. Pull up on the quarter panel and pull the headlight out from under it at the same time.
8. Once you get the headlight out, bring it inside and pre-heat the oven to 180-200.
9. Pop off the 5 metal tabs on the headlight and un clip the plastic ones.
10. Put the headlight in the oven for 1:30-2:00 mins, the take it out and use a screw driver to start prying it apart.
11. Keep putting it back in and pulling it apart until you get the 2 pieces apart.
12. Now start taking out the screws for the black piece inside the headlight.
13. You can see the screws for the orange lens, take those out, pop out the lens and screw everything back together. ( You can either keep the reflector in it or take it out. I took it out)
14. Now reverse the process to seal the headlight back up.
15. Put it back in, put all the bolts back in and you now have custom clear corners.
Disclaimer: Some states have laws that you need orange parking lights.

* www.diamanteowners.com for all your questions or needs. *