OK...SO YOU PURCHASED YOUR V.D.I. LAMBO DOORS FOR YOUR SUNFIRE. I AM SUPPLYING EVERYBODY THESE INSTRUCTIONS BECAUSE THE INSTRUCTIONS V.D.I. SUPPLY ARE FOR NEWER CELICAS. BY TAKEING THESE PICTURES YOU ARE ABLE TO SEE EXACTLY WHAT YOU HAVE IN STORE FOR YOU. ARE YOU READY TO PUT THEM ON??? HERE WE GO.

1. FIRST TAKE WHEEL OFF AND REMOVE WHEELWELL FASTENINGS AND SCREWS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. REMOVE THE HOOD.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3. REMOVE THE HEADLIGHTS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

4. REMOVE THE REMAINING TOP TWO FENDER BOLTS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

5. REMOVE THE INNER FENDER NUTS AND BOLTS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

6. REMOVE SCREW BEHINDE THE DOOR.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

7. REMOVE THE TWO LOWER FENDER SCREWS LOCATED UNDER THE DOOR.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

8. REMOVE INNER FENDER SHROUD.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

9. REMOVE SCREW FOUND BEHIND INNER FENDER SHROUD.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

10. REMOVE THE FENDER. I ALSO LIKE TO SET THE WHEEL ON AND LOWER THE CAR SO THERE IS NO BODY TWIST AS I ADJUST THE DOOR.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

11. MAKE SURE DOOR DOES NOT COME OFF...I USED ROPE...INSTRUCTIONS CALL FOR BOLTING ON "L" BRACKETS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

12. REMOVE INNER FENDER MOUNT.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

13. CUT WIREING HARNESS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

14. HAMMER FLANGE FLAT.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

15. REMOVE DOOR HINGES. IF YOU USE "L" BRACKETS LIKE THE INSTRUCTIONS TELL YOU, YOU WILL NOT BEABLE TO GET THE HINGES OUT.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


16. BOLT ON THE KIT USING THE BOLTS THEY PROVIDE AND THE NUTS OFF OF THE TOP OF YOUR STRUT TOWERS BECAUSE THE KIT DOES NOT INCLUDE THEM. IF YOU USE YOUR STOCK NUTS THEN YOU DONT HAVE A WHOLE LOT OF PLAY TO WORK WITH WHEN TRYING TO ADJUST THE DOORS. REPLACE THE TOWER NUTS WITH THE STOCK DOOR NUTS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

17. LUBE AND LOCK-TIGHT THE SHOCK BOLT.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

18. INSTALL THE SHOCK WITH THE HELP OF A FRIEND. MAKE SURE YOU PURCHASE COTTER PINS...THEY DONT COME WITH THE KIT.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

19. WITH THE DOOR OPEN YOU CAN NOW REACH THE OTHER BOLTS YOU WERE NOT ABLE TO GET TO.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

20. NOW DO SOME ADJUSTMENTS BY OPENING THE DOOR AND CLOSEING IT. AND AGAIN, AND AGAIN, AND AGAIN.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

21. NOW YOU CAN PUT EVERYTHING BACK TOGETHER WITHOUT THE INNER FENDER MOUNT & INNER FENDER SHROUD. GOOD LUCK AND LET ME KNOW IF YOU HAVE ANY ???'S. I'LL TRY TO HELP OUT.