Modifications
Performance Parts
Interior
Exterior Styling
page1: J's Racing s2000
page2: Amuse s2000 look
page3: some pics when stock
hi welcome to my new ride 2003 honda s2000 white with blue interior
Ride Mods
Engine:
NGK Iriway 7 sparkplugs
Carbing .6 liter oil catch can
Spoon sports Resevoir Covers
Spoon sports oil cap
Spoon sports magnetic drain plugs
Spoon sports carbon fiber sparkplug wire cover
J's racing alluminum heatshield
J's racing engine torque damper
J's racing 70mm outer 66mm inner throttle body(custom port matching to inatake manifold)
J's racing CFRP cai intake
J's racing SPL exhaust manifold
J's racing 70rr ti 70mm headerback exhaust
J's racing N1 ecu
T1R lightweight battery
T1R vpower voltage stabilizer
T1R earth powering grounding kit system
Drivetrain:
Spoon sports 3 puck metal race clutch
Spoon sports 4.2kg flywheel
Spoon sports 1.5 way LSD
Cooling:
Spoon sports radiator stay
Spoon sports titanium bolts
Spoon sports thermostat
Spoon sports thermoswitch
Spoon sports SEP radiator hoses
Tabata/Fwin Hi Pressure Radiator Cap
FWin 55mm Race radiator
Suspension/brakes:
Spoon sports monoblock brake calipers(fronts)
Goodridge steel braided brake lines(front and rear)
briggs performance brake pads(front and rear)
T1R Bmax-R alluminum coilovers
J's Racing SPL Drive Shaft Spacers
J's racing front strut tower bar
Spoon sports front xbrace
Spoon sports rear tie bar
Alex rear strut tower bar
Wheels:
Buddy Club Japan P1 racing QF's Forged wheels(for track)
17x8 et 45 front
17x9 et 63 rear
wrapped in Advan A048 r-compound tire 215/45 front 245/40 rear(track tires)
5mm wheel spacers in front(clear calipers)
5mm wheel spacers in rear
Spoon sports lightweight lug nuts
Interior:
Bride zeta 3 racing bucket seat(driver side)
Bride zeta 2 racing bucket seat(passenger side)
Alex race seat rail(driver side)
Mugen seat rail(passenger rail)
Spoon sports steering wheel(made by momo)
Alex steering wheel spacer
HKB steering wheel hub
Spoon sports ti shiftknob
Broadway 240mm blue tinted rear view mirror
Exterior:
Mugen FRP hardtop
J's racing front lip
J's racing carbon fiber canards
J's racing type S version 1 carbon fiber hood
J's racing Carbon Fiber Rear Diffuser
AJR custom made Carbon fiber side skirt diffusers(ASM style)
Buddy Club 3D carbon fiber gt wing
Seibon Carbon fiber trunk
Jdm Honda badges
removed softop and motor
rolled fenders(front and rear)
Audio/Electronics:
Defi D-link display
Defi D-link control unitII
Newest and latest mod J's Racing CF rear Diffuser, Sorry for bad quality pic:
Here is some pics and a in car video clip of me doin 1:43 at pacific raceways Sept 28th 2005 last track day of the year for me:
right click and save as
Finally Mugen FRP hardtop is on...nomore convertible but now better aerodynamics, and 2570 lbs with full tank of gas:
Stage 1 weight reduction and removing softtop for awaiting hardtop install...heehee i had no room in my place to put all my panels away:
my friend justin and i got bored and took some more pics at night and the last of my car being convertible=(:
Another new photoshoot..thx to my friend winston(esodraggers.com):
my new helmet and racing gear:
New photoshoot..thx to my friend justin(moo man):
Some shots of my S2k at pacific raceways track day in seattle 08/01/05:
Some shots of A&J racing's J's racing version1 and 2 s2k's at HIN car show in seattle 07/30/05:
AJR custom made Carbon Fiber side skirt diffusers:
July 5th track day at pacificraceways in Seattle, Kent was a blast..until we got in trouble because of our exhausts being too loud heehee..well here some pics of the event we had enjoy:
Here our some pics of my ride and friends ride in the pit stop:
Here we are on our way back home from the race tracks..3 hr drive back to vancouver, BC:
Sorry i couldn't resist=) here is more pics enjoy:
June 25th Finally got some new pics of my ride with some new mods, SPOON calipers, Tein RS circuit master coilovers, Bride zeta2 bucket seat on Mugen rails, special thx to ben low for taking the pics for me:
June 10th got some new goodies installed :spoon mono block front calipers, J's 70mm outer 66mm inner diameter throttlebody, and J's n1 ecu...didn't take much pics of the mods..only got the spoon calipers but will get some more pics up shortly:
May 17th track day was one of the funnest experience i ever had at pacificraceways in seattle kent...for more info check out www.pacificraceways.com
Lets start off with a big thanks to Don Kitch, Jr. and his staff for the Advance Driving Course at Pacific Raceways, ProFormance Racing School, this years track date was awesome..definitely goin back soon and do it again, didn't take much pics at the track cuz most of the time was on the track heehee
May 14th SCN at BC Place in Vancouver, BC..my friends s2000's and mine won 1st, 2nd, and 3rd for best s2000's=D
UPDATED!!! Added Mugen FRP hardtop, Removed Softop and motor, removed A/C compressor and lines, removed spare tire and tool box,removed air bags driver and passenger, and gutted trunk....Currently weighing in at 1170 kg=2574 lbs with full tank of gas on a truck scale, below pics were b4 softtop, motor and A/C removal weighing in around 1206kg=2654lbs on a corner weight scale..:
my friends k20r swapped into a dc2 chassis...super light and fast:
Defi power!!!
heehee I had to borrow my friends rims for the day..SPOON??:D
My J's 70rr header back ti exhaust pics on the car and seibon CF trunk:D
This is the power i making this yr so far with new mods compared to last set up mods i had...
Dyno005 mods: tuned apexi Vafc, 70mm bored throttle body, Spoon intake, toda 4-2-1 header, T1R 63mm exhaust with testpipe...
Dyno004 mods: J's throttle body, J's cai intake, J's header, J's 70rr titanium headerback exhaust, stock ecu and untuned..
I just got the J's racing N1 ecu installed and the car feels alot more responsive and throttley..will get new dyno figures shortly..stay tuned!!
My J's parts pics b4 install:D
Thx to A&J racing for new pics:D
some more updated pics of my s2 with new J's header, J's torque damper, J's alluminum heatshield, Fwin55 race radiator and bride zeta 3 bucket seats:D
