If you're an IROC owner or IROC fan, visit my website:
The IROC Homepage
My site shares the Internet's largest IROC-specific message board with IROCZone
------------------------------------------------------------------------------------
Welcome to my Cardomain page. I finally decided to make a page here because some of my other web locations have proven to be less than reliable.
In any case, on this page, you'll find information and pictures of my IROC. How much you find will depend on how much time I have to update the site.
Absolutely everything on this car has been done by myself unless stated otherwise.
The paint and body work was done by my father and I (mostly my father - I was in college at the time). "Before" pictures are on page 6. It was very rough when I bought it back in 1998. The engine was built by my father and I. We had a local machine shop do the engine bore, install the freeze plugs and install the cam bearings. We did the rest.
This is pretty much how it looks right now.

Here's a picture of my car at a local cruise night from last year.
Here's the engine bay from the cruise night.
Here are some more pictures of my engine bay as I was installing the plenum and runners after polishing them:

Here are a couple current pics of the interior:


Current configuration:
Engine:
-355 cubic inch
-Forged flat top TRW pistons
-461 "fuelie" cylinder heads
-Summit 214/224 .461/.465 112lsa hydraulic cam
-Accel TPI intake base
-Polished SLP TPI runners
-24lb/hr SVO injectors
-Holley 52mm throttle body
-Heddman headers
-3" Dynomax high-flow cat
-2.5" Dynomax catback exhaust
-Converted from stock 870 ECM to an 86-89 165 ECM & wiring harness
-Custom DIY PROM tuning that I'm still trying to get the hang of.
Suspension:
-Jamex lowering springs
-BMR lower control arms
-BMR lower control arm relocation brackets
-BMR panhard rod
-Jamex strut bar
Interior
-1995 Trans Am graphite leather seats
-Stereo highlighted below
Stereo
-JVC SH909 head unit (currently out for repair, so I'm using my Alpine 7863 in the meantime
-JVC DV7 DVD player
-Nesa 7" 16:9 LCD monitor
-Diamond Audio components
-2 12" Oz Audio 300L subwoofers
-Kicker ZR240 for the components
-Kicker ZR600 for the subs
-2 Audio Control EQTs (not installed yet)
-Custom made kick panels
-Custom made console for the LCD
-Modified dash for DVD install
-Custom made sub enclosure
Exterior:
-Custom blend paint, based on "86 GM Bright Red" with orange mica added.
-Harwood cowl hood
-No decals or stripes
-Refinished stock wheels
Other
-Griffin dual core radiator
Future plans (i.e. nothing is ever done):
-Finish the interior. It needs carpet, headliner, sail panels, door panels and sun visors.
-Finish the audio install. The eq's aren't installed yet. They're going in my back seat. The subs & amps are installed but the cosmetics haven't been done yet.
-Heads, cam, Stealth ram. The heads on the car suck, and are a very, very bad combination when matched with TPI and a mild cam.
Updates to come
Page 1 - Exterior
Page 2 - LCD Installation
Page 3 - Head Unit Installation
Page 4 - DVD Installation
Page 5 - Finishing of LCD & DVD Installation
Page 6 - "Before" pictures from the day the car was purchased
Page 7 - Pics of the IROC with my other vehicles, and links to my other vehicles (88 GTA, 87 GMC, 91 Corvette, 92 Camry (girlfriend's car)