K&N Aircharger Installtion
Before the installation.
With the throttle body cover removed.
With the two vent lines from the air intake resonator removed.
The intake tube removed from the throttle body and airbox.
The airbox removed.
With the heat shield and saddle bracket installed.
A look at the silicone hose on the throttle body.
Now the K&N intake tube and mass air sensor is installed.
A closer look at the mass air sensor on the K&N intake tube.
The filter is now install on the intake tube.
One last look before the throttle body cover goes back on.
All done, This whole install took about an hour or so.
