DIY Reset Your Sun/Moon Roof
The reason you would want/need to reset your sun/moon roof is that your sun/moon roof is malfunctioning and does not open or close fully. If you press and hold your sun/moon roof buttons too long, sometimes your sun/moon roof cpu gets "confused" as to where the open and close points are located. And as such, the sun/moon roof just barely moves. It doesn't move. It nudges. This is not all that common. It's more common with 02-03 and 03-04 models. '04+ models come with a different sun/moon roof assembly, and don't share this problem. If you have '02-'03 or '03-'04 sunroof and jamming is common, there is a TSB (Technical Service Bulletin) which your dealership should replace your sun/moon roof assembly with the newer/better sun/moon roof assembly.
Tools needed
Sun/Moon Roof Tool
Getting your sun/moon roof back to the closed position.
1. Check the rails of your sun/moon roof for debris. You don?t want to force your sun/moon roof to come off the rails and possibly break something.
2. Check your Users Manual for the location of your Sun/Moon Roof crank hole.
3. Crank the Sun/Moon Roof to the closed position.
Reseting The Sun/Moon Roof
1. Turn your Key to the OFF/LOCK position.
2. PRESS AND HOLD TOGETHER the UP and OPEN buttons on your overhead Sun/Moon Roof controller panel.
3. While HOLDING the UP and OPEN buttons, turn your key to the ON position. DO NOT TURN TO THE START POSITION.
4. Turn your key to the OFF/LOCK position and then release the UP and OPEN buttons.
This will reset your Sun/Moon roof cpu and now it should open fully and work properly.
