I bought a couple of these Parrot 3200 LS Bluetooth handsfree kits for our two vehicles. I decided to mount the Golf's display in the small sunroof motor panel. This way if I ever decide to ditch it, I just have to get a new trim panel.
I originally wanted to mount it in the top left corner of the windshield, but decided it would be too much of a hassle, and would cover too much windshield.
Here's the first layout picture.
Made a little frame for the display.
I used some Super 77 spray glue to hold the fleece in place. RIP to my old blue jogging pants.
First coat of resin has been brushed on.
Second coat of resin.
Cut out the display region with my trusty Dremel.
Sanded the bumps out of the resin, and roughed up the finish for the Bondo to bite into it.
Test fitted in the car.
Bondo applied, can you tell it's my first time? This stuff thickens super fast! This looks like a science fair volcano.
Sanded down the bondo, this was quicker than I thought it would be. Note the small hole drilled for the microphone.
