*****UPDATES*****3-27-07
Car is torn apart once more, fixing some small vac leaks i had and putting in a helicoil or two in my lower manifold. Also picked up some stainless steel brake lines so stopping should be a bit better. And finally going to install that line lock kit i've had kicking around forever.
Doing the rear upper control arms as well... Just no time to do all this shit, working way too much now.
I'll keep ya updated!

This here is my 1992 Mustang GT.

Engine Mods:

331 Stroker w/ FMS R302 Block
Eagle 4340 Forged Crank
Eagle 4340 Forged H-Beam Con. Rods
JE Forged Blower Pistons
Comp Cams Hyd. Roller:
. Duration'': 224°/232° @ .050''
. Lift: .555''/.565''
. Lobe Sep: 112º
AFR 185 Stud Mount Heads
Comp Cams Pro Magnum 1.6 Roller Rockers
Steeda Aluminum Underdrive Pulleys
Edelbrock Performer RPM Intake(1500-6500)
1" Phenolic Spacer
42# Injectors
N.O.S. 125 Dry Shot
C&L 75mm MAF for 42# Injectors
Accufab 70mm TB
Edelbrock 70mm EGR Spacer
BBK Fenderwell CAI
BBK 29-74psi Aluminum Fuel Pressure Regulator
AC Delete Kit
Smog Removed
Griffon 2 Row Aluminum Radiator

Electrical Mods:

MSD Pro-Billet Distributor
MSD 6AL Ignition w/ Rev Limiter
MSD Blaster 3 Coil
MSD 8.5mm Wires
MSD Rev Limiter Dial
Electric Fan
BBK 255 LPH Fuel Pump
N.O.S. Purge Valve
Flaming River Battery Shutoff Switch
Superchips Custom Tuning Flip Chip
860 Performance Bottle Heating Bracket
860 Performance Window Switch

Drivetrain Mods:

Tremec TKO500
4.10 Gears
Mcleod Scatterproof Bellhousing
Steeda Adjustable Clutch Cable Kit(quadrant,firewall adjuster, cable)
Spec Stage 3 Clutch
FMS SFI Approved Flywheel
Steeda Tri-Ax Short Throw Shifter
Superior 31 Spline Axles
FMS 31 Spline T-lok
Trick Flow Diff. Cover

Suspension Mods:

QA1 Tubular K Member
QA1 Tubular A-Arms
Strange Coil Over Conversion w/ 175# Hypercoils (front)
Eibach Pro-kit Springs - Lowered 1.5"(back)
Strange 10-Way Adjustable Struts
Battery Relocated in Back
Competition Engineering Adjustable Pinion Snubber
Steeda True-Full Length Sub-Frame Connectors
Powerslot Rotors w/ Hawk Performance Pads
Polyurethane Spring Isolators
Maximum Motorsports Caster/Camber Plates
Maximum Motorsports Rear LCA's
Mickey Thompson ET Streets 26x10.5(Track only)

Exhaust Mods:

BBK 1 3/4" Ceramic Coated Long Tube Headers
BBK 2.5" Off Road Shorty X Pipe
Magnaflow Magnapacks

Appearance Mods:

17x9 Cobra R Rims
Fiberglass 4" Cowl
Moroso Steel Hood Pins
Saleen Wing w/ Third Brake Light

Mods to come:

Lakewood Driveshaft Safety Loop
Summit Line Lock
FMS 3.55 Ring n Pinion
FMS Rear UCA's
SS Brake Lines

Currently Being Installed:

A few helicoils and doing my brake lines, rear control arms(upper) and finally my line lock.

Here's a few pics of my friend's car and mine.

Just some Old'n New Pics side by side.

The dumpster only helps accent the true beauty of the car!(probably)

Everyone seems to have one of these shots, so why not?



Older pic at night in front of my house.

Nice fall picture.

------------------Nearly Stock-------------------------------------------------------------------------------Not So Stock-----------

(STOP!) If you don't clean it. Don't touch it!

My 17" Cobra R rims on BFGoodrich g-Force T/A KD's(245/45/ZR17)

}Page 1{ Pics & Mods You're Here
}Page 2{ Vids
}Page 3{ Fresh Installs