Interior:

 Full custom interior with custom stereo. Everything has been replaced, the Dash was hand made by me and houses all Autometer Ultra-lite Gauges. The gauges are a Monster Electronic Speedo & Memory Tach w/LED Shift Light, NEW Full Sweep Electric 2 1/16" Fuel Pressure & Water Temp, there is also Fuel Level, Trans & Oil Temp, Oil Pressure, Volts and the D-PIC(it is like the G-Tech). Also in the dash, a Double Din Pioneer Avic D3 DVD/Nav w/7" Screen and 3 other 7" LCD screens throughout the car. The Billet 3-knob controller for the Vintage Air has been custom mounted as have the sunk-in A/C Vents just about the center console. The Tilt Column is out a an 88 GTA with an Isotta Billet Steering Wheel. A B&M Pro Stick w/line loc switch and a  2-Step Switch in the Shifter Knob. I have converted the hood to an in-car release(by Lokar). Courtesy lights on the side & rear of the console and a rearview mirror with Air Temp and Direction is also there. 
 
The console was hand built and houses more Autometer Ultra-lite gauges and various switches for the doors, mirrors, seat & antenna. This has been completely re-done and now houses my I-pod mounted in a slide door that hides some of the other switches. I also added an ignition Push           

Button and a 7" LCD Screen for the back seat for my Kids. The glove box door has been shaved of its lock and is smooth inside also. The door is motorized and opens to allow access to the MSD Digital 6-plus and HVC II Coil that are mounted to a custom panel inside of the Glove Box. The Box is hinged so I can get at the DialsI was very surprised at how much room the Vintage Air unit took up, I was lucky to fit the MSD Box and Coil. It is very tight under this part of the dash.

Original door panels are covered with Tweed and Leather w/custom patterns. The controls for the power windows have Billet covers, the power windows and vent windows were custom made and are very unique. There are also power mirrors. The speakers are MTX Thunder 6001 6 1/2"mid bass in each door and the matching Tweeter is mounted in the rear deck with the MTX 8". Doors           

are opened electrically by remote.

I added Billet Momo Pedals, as you can see I had to modify the Emergency Brake Pedal to fit the Custom Kick Panels, yes the e-brake does work. Because there are no ready-made Kick panels(with Separates) available I had to make mine. They were alot of work but they look great and they sound even better, also I know I will likely never see another setup like mine.  There is a pair of MTX Thunder 5001 5 1/4" + Tweeter in the Kick Panels. You can also see one of the A/C vents, my car did not have any vents at all(no astro-ventilation) so I had to add every vent to the car.

 APC Racing seats are new as are the 5-point Harnesses. I added the Power Seat Track from my previous seats to the Drivers seat. The rear seat is the the factory unit covered in Tweed, I am going to try to mount my old Leather seats that were out of a Dodge Daytona in the Rear. This will give me buckets in the rear, very cool. This is the only shot I have of the new Rear Deck, this has been re-done with 3/4" MDF and sealed for each speaker. There are a pair MTX 8" 5500 subs runinng rear fill with a 1" Dome tweeter from the 6001 set from the doors. The Tweeter is down -3db on the Crossover. This pic was taken with the Rear Glass removed, that is the only way I could do all of the work that was needed to make the rear deck solid. Each 8" has it own sealed air space.

  TRUNK: 

  The trunk is also highly customized, it is all scratch built. Everyithing is finshed off in Tweed or Leather to match the Interior. The Sub Box holds 3 MTX 1202 12" Subs, these things are massive with a 30lbs Magnet. Aluminum Basket, Huge Magnet, they are awesome. 1" Plexi covers the back wall with Blue Neon lighting inside. The amps are all Phoenix Gold, these are Old School very solid amps. The first is a Limited Edition Route 66, this one is 40w x 6, I recently added an MPS-2500 for more power @1ohm. The amps are fan cooled and Blue LEDs surround the amps in light. The passenger side houses the Crossovers for the MTX Separates, one pair for the 6001 and one pair for the 5001. You can also see the MTX 5 1/4" 2-ways that are mounted in the rear panel, I had to add some vocals to the trunk for watching a Movie at a Cruise or Car Show, they are just hooked to the power of the deck.

  The Drivers side of the trunk houses the Fuses for the individual amps, and a Tsunami 40 Farad Capacitor. This is a very nice Cap, it has Blue LEDs to match everything else and has enough storage to keep the amps happy. You can also see one of the two 7"LCD Screens mounted in the trunk, there is one on each side. The upholstering was all done my myself as was all of the equipment.

 Don't miss the rest.