2K3 Angel Eye foglight installation
Well, I had to restore my 2k3 Maxima back to stock. But when I installed my bodykit, I sold my original 2k3 foglights from somebody on Maxima.Org for a good price.
Now I need to fill them with some foglights, so i decided to go with these. Slightly smaller than original but looks great and works fine!
Now we begin the installation process. I decided to remove the front bumper, as it was MUCH easier to install these and screw them in.
I mounted the foglights by mounting the brackets and screwing them from behind the foglights (therefore behind the front bumper as such).
Now comes the wiring, this is where it gets complicated. And this is where I will explain.
I DID NOT WANT A SEPARATE SWITCH IN THE CAR. My maxima already came with foglights so it already had foglight switch in the turn signal lever.
What wanted was for the foglights and angel eyes to come on automatically with the auto headlights, and also switch via the factory foglight switch.
Headlight switch OFF - Foglights OFF/Angel Eyes OFF
Headlight switch ON/Factory Foglight switch on - Foglights ON/Angel Eyes OFF
Headlight switch ON/Factory Foglight switch off - Foglights OFF/Angel Eyes ON
Oh, and when you have the foglight switch on, and you do a flash to pass (hibeam flash), it goes switches from foglights on to angel eyes on and vice versa.
I used two relays, and some creative thinking to get this to work, but its very simple, and i just tapped into my corner light and my factory foglight wires to get this whole thing to work as shown in the picture.
Here is the finished product:
