ok a quick background--a/f guage boost guage and temp guage--8.5 wires with ngk plugs and performance coil--2.5 inch pipe all the way from the turbo-no cats--3 wire o2 sensor--apc muffler with 4.5 exit--boost controller--homeade over the valve cover pipe--new injector clips--blow off valve--NOW THE BEST--TURBO small 16g with 1st gen housing--great runner hopefully will be running mid to low 13's this summer--wired all 3 fans to come on at 180 degrees--and the last thing I am going to attempt is the 1st gen mass air flow meter--some say this will put another 10 ponies to the ground--we will find out--Pics of the install of the mas will be posted soon--alng with my timeslip from the track as soon as the weather breaks--wishing for 13's --as I stated before I did all the work myself except for the exhaust couldn't bend the pipe--so I am very happy with the results---18 PSI OF PURE EXCITEMENT---
Here is the 16g shot with 1st gen compressor housing---tough build but finally done
Here is a shot of the ghetto rig I had to do Pipe to pipe connection on the ic pipe--BUT IT WORKS
Another shot of the engine--most of the parts used I fabricated myself u probably can tell but---ITS FAST---
This shot tells it all--Had to make a bracket for the wastegate actuator to be bolted on from the old 12a exhaust housing to the 16g 1st gen housing---LOTS OF FUN
