Rear view of my Cobra
Mine since 6-19-2002, lots of mods.
One popular mod is smaller pulley for more boost.
Billetflow non-slip 2.76, makes about 14lbs of boost, idlers prevent belt slippage.
Grooves in the pulley also help it work better.
Billetflow makes the best idler pullies too.
Billetflow Throttle Body and Plenum enhance throttle response too, acceleration is violent if you mash it now.
Tuning is with Diablosport Predator. Just plug it in, flash the car for your particular mods and go faster.
Also just added Lightning Force Performance Heat Exhanger
Pic of the puny stock Heat exchanger compared to my new LFP unit.
Pic with the top up. The rear tires are 315/35-R17 Nitto 555 Drag Radials. Also car has Bassani catted X Pipe and Catback. Those are 4 inch tips.
Bassani tips closer here.
Close up pic of the Nittos.
My car club is the
MOTOR CITY TERMINATORS.
We also have our own forum at
www.SVTperformance.com
Try this trick with your boring old vinyl inserts! Special thanks to Scott Winger for getting them to me so fast. They fit great and were as easy to install as a bumpersticker. They are very relective, almost mirror-like. They stand out very well on the SONIC BLUE paint. Other times they blend in to near invisible, depends on what angle you view them at or how fast I am driving by you :~)
Just swapped out the IRS and Bassani catback for an 8.8 Live Axle and a Borla catback.
Installed a Hurst Roll control Line Lock on the car today with the help of some friends. Took about 1.5 hours including bleeding the front brakes. The unit mounts to a bolt directly behind the ABS unit. The Hurst setup leaves about 20 parts unused, lots of unneeded items. Also it has two long lines that you don't need. All you need is two 12" lines. Routed the wires through a grommet in the firewall.
Found this cool switch at Autozone. I like it better than the momentary switch in te Hurst kit. Here is is in the off position.
Here it is "on"
Put on a Lakewood Drive shaft loop too.
Uses 8 bolt through the floor pan, have to pull the seats and lift the carpet to do it.
