Here are details on how to install LED's in the interior of an NA Miata.
First step is to purchase these:
www.amazon.com/exec/obidos/ASIN/B0002S9ZRE/nextag-auto-20/ref=nosim
They are cheap, bright, and fit perfectly.
Step # 1 - Remove from package:
Step #2 - Remove the metal jackets:
Step #3 - Insert the LED into the visor plug. The visor plug is held into the windshield header by two phillips screws. Remove the plug and install like this:
Step #5 - Clip the cigarette adaptor using wire cutters and remove the shielding from the wire to expose the ground (found just inside the shielding) and the +ive (inside more shielding). Be careful, this wife is very thin and is easy to remove more wire than you wanted!
Step #6 - Now it is time to solder the wire provided with the lights to an extension wire. I purchased a huge bulk role of 18ga wire from Princess Auto for $7.99. Then wrap the -ive wire around one piece of extension and the +ive wire around a 2nd piece and solder as shown.
Install finish steps to come...
