THIS HOW-TO WAS DONE BY ORG MEMBER "dafertilizer"
http://forums.maxima.org/member.php?u=63530
Passenger side light overall wiring
High Beam
red connector is connected to the 2k harness green wire as shown in the next photo
The blue connector is wired to the blue wire that I put there, it is the power wire from the 2k harness, it powers both the high beam and the HID.
Turn Signal:
the right side wire from the Grey plug on headlight, is for the running light, and connects to the brown/red wire in the turnsignal plug
the right side wire of the brown turn signal plug connects to the ground (black wire) on the car turn signal plug, and the left side wire of the brown turn signal plug connects to the green power wire on the car plug.
the middle wire comming out of the the center grey plug is connected to a chassis ground, and the picture got cut off, so you cannot see the left wire of the grey plug is connected to the same blue power wire that the high beam light is connected to here:
the right side wire from the Grey plug on headlight, is for the running light, and connects to the brown/red wire in the turnsignal plug
the right side wire of the brown turn signal plug connects to the ground (black wire) on the car turn signal plug, and the left side wire of the brown turn signal plug connects to the green power wire on the car plug.
