Vehicle Owner

Member ID: sntnpirate1316

Location: Sinton, TX

Vehicle Info

1996 GMC Sierra

Bragging Rights

  • 1/4 Mile0 sec @ -1 mph
  • 0-600sec
  • Top Speed-1mph
  • HP-1
  • Weight-1lbs

Major Upgrades

  • turbo
  • nitrous
  • bore increase
  • port and polish
  • supercharger
  • extrude honed
  • stroke increase
  • engine swap

Ratings

    • Currently 2.2/5 Stars.

Login to rate

 

Last updated: Dec 09, 2008

Hits: 14,726

Cody’s GMC Sierra

  • Currently 2.225 /5 Stars.
11 guestbook comments

'After' pictures I never took before I took the head liner off of everything after sludge
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
Adding some stiffness to the roof...hopefully no flexing even with 4kw
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
This is what I'm using for my fans. The voltage on this is selectable, I will be running them at 5V most of the time. I will tie on to the fan wires on the amp as well so when they turn on full blast, my aftermarket ones will as well (the fans on the amp have an off, 5V, and 12V settings, depending on the temperature of the amp)
sntnpirate1316's 1996 GMC Sierra
Foam in the crossmembers!
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
Deadening of the doors commence!
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
Cut out for the access hole
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
Almost done! Waiting on the firewall to be put on.
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
Getting the baffle ready. At this point, its had 3 coats of wood sealer and a thick coat of resin
sntnpirate1316's 1996 GMC Sierra
Close up of the t-nuts where the speaker will be bolted in
sntnpirate1316's 1996 GMC Sierra
Before baffle
sntnpirate1316's 1996 GMC Sierra
After baffle
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra
Firewall and I'm done!
sntnpirate1316's 1996 GMC Sierra
sntnpirate1316's 1996 GMC Sierra

Guestbook

Displaying entries 1-5 of 11

Anahuakense  

Posted by: Anahuakense

12/10/2008 12:01PM

good job

92sierraslx  

Posted by: 92sierraslx

12/09/2008 07:38PM

looks good that truck needs to be lowered and cruised once you get a 4x4 check out my 94 somtime

loENOUGH  

Posted by: loENOUGH

06/29/2008 05:35PM

Speakers look great man! keep it up

sntnpirate1316  

Posted by: sntnpirate1316

03/25/2005 02:07PM

Thanks majestic! It means a lot to me that you're the first person notice the fiberglass work I did. Thanks for the kind words. But to clear things up, this was my first attempt at fiberglassing, so yes things aren't perfect. The reason why the fleece is different on the a-pillars is because on the passengers side there was a handle so I had to cover up the hole at the bottom. You can see the seams on the kicks? Really? Thanks for informing me because I certainly didn't see that. If you'd actually read instead of looking at the pictures (most people past the 2nd grade do this, but I don't know about Canadians) it even tells you why they don't look good! Thanks again. -Cody

majestic_  

Posted by: majestic_

03/13/2005 10:05PM

What blind man taught you how to fiberglass.... your pillar pods and kicks are hideous... when you set up your pillar pods your fleece on the driver's side and passenger's side don't even look the same. On your kicks, I can see the seams where you stretched the material and you didn't even fiberglass or bondo the shape to blend it in (it's wavy like a mofo). Everyone's an installer....

Show Older Comments

Post a comment

Bookmark this Ride

Vehicle Owner

Member ID: sntnpirate1316

Location: Sinton, TX