Page One: Home Page
Page Two: Sound
Page Three: Lighting
Page Four: Interior
Page Five: Exterior
Page Six: Dads Car
Page Seven: HID Retro Project
Page Eight: Engine bay Pics
These are the 2 OEM ballasts, ignitors and bulbs that I used for the retrofit.
I had to use the OEM reflectors off of some broken infinity headlights. I decided to do this since the plug and play kits can be so unreliable. I kept the stock glare shield in order to prevent any future glare issues.
Here is a shot of my headlight and the remnants of the cut reflector
A closer shot of the headlight. As you can see, I had to make the hole bigger and remove the stock 9004 bulb holder.
This shot shows the slit I had to cut in order to hybridize the small piece of HID reflector into the housing.
A shot of the headlight and the piece of cut reflector that will go inside of it.
the pieces fit snugly together after lengthening the slit. I sealed it with black waterproof sealant
Next Project: HID Projector Retrofit
here are some day pics of the projector retrofit
