coffeedrnkr15’s 2000 Chevrolet Blazer

some old Offroading pics with my truck still on ifs Here is at the ledges where I went up at tuttle off road vehicle area. 1-02-2005 New offroading pics from my trip to tuttle orv area. The master mechanic himself (me) ripping out his cv shaft after he busted it. Here is the video where I busted it, if you listen closely you can kinda hear it pop. (right click and "save as") Movie

Flex pictures!! Here are some pics of my trip to tuttle on 7-9-2005 there aren't very many b/c shortly after we got there my digi cam's batteries went dead. This is an obstacle called the critter getter, it is about a 4 foot tall straight up ledge. it took a little rock stacking but I eventually made it up on my own. We had to tie the rope to the bumper to make sure it didn't go over on me.

SAS ProgressParts list so far: dana 30 from a 90' yj leaf springs from an older s10 blazer new superstrength u joints home made shackles and crossmember Home made 4x4 posi lock 4.10 gears and install kit jeep grand cherokee pitman arm leaf spring perches New spicer ball jointsJB 4x4 crossover steering conversion bracket

New Pictures from our trip to Disney, Oklahoma Lettin my friend Garrett play a litte... OMG, woman driver..... This is my truck on a tow truck after I stripped the ring and pinion in my rear axle.....whoops... Kansas rocks 9-10-05 Carnage canyon ripped a hole in the sidewall Kansas Krawl III at tuttle creek broke a u-joint not on the ledge pictured above but a different one (kinda mad I didn't get any pics of it) Here is some pics of the carnage from my latest trip to tuttle for the hangover krawl on 1-1-06 I got stress cracks in my frame and we temporarily got it welded up at a local shop until we can plate it later... and I broke my crossover steering bracket....again so we got that temporarily ghetto welded to get home untill we can beef that up too

I am in the top 55 that are getting put in the April issue of FOUR WHEELER for the Top Truck challenge '09!!!! I need you guys to help me out, by gettin the magazine, cut out the ballot and vote for me!! Competitor #18! Thanks!!!!Paul http://www.fourwheeler.com/eventcoverage/129_0904_2000_chevy_blazer_ttc_09/index.html

The rebuild page: I have an atlas II 3.8 sitting in here on my living room floor waiting for me to get home from school this weekend to put it in. I also have fullsize 63" chevy leafs and a ford 8.8 with 4.10's ready to go in this weekend too Here is another pic to compare the size of the two leaves Getting taken apart in the garage the atlas and the old autotrack Here is a mockup of the 63" chevy springs We got the atlas in for the most part but it is interfering with some fuel lines and electrical stuff..... I still can't seem to figure out why the cable shifters are like 3 MILES long....I have no idea how these are going to work.. Some new updates..... got the new wheels mounted Got the springs and axle mocked up and got the rear sitting on it's own weight so we could measure for driveshafts/brake lines and stuff new updates...02-26-06 I think I need a bigger garage.... another angle Got the driveshaft in MMMM.....twin sticks Well, I took it out for a shakedown run somewhere local and had a minor incedent I was coming out of a mud hole and hit the gas pretty hard to get up this really steep hill and I guess the front tires gripped really hard and I managed to break both front u-joints at the same time!! and my front axle is not locked.... haha, here in my new sticker :D

some old Offroading pics with my truck still on ifs Here is at the ledges where I went up at tuttle off road vehicle area. 1-02-2005 New offroading pics from my trip to tuttle orv area. The master mechanic himself (me) ripping out his cv shaft after he busted it. Here is the video where I busted it, if you listen closely you can kinda hear it pop. (right click and "save as") Movie

New Pictures from our trip to Disney, Oklahoma Lettin my friend Garrett play a litte... OMG, woman driver..... This is my truck on a tow truck after I stripped the ring and pinion in my rear axle.....whoops... Kansas rocks 9-10-05 Carnage canyon ripped a hole in the sidewall Kansas Krawl III at tuttle creek broke a u-joint not on the ledge pictured above but a different one (kinda mad I didn't get any pics of it) Here is some pics of the carnage from my latest trip to tuttle for the hangover krawl on 1-1-06 I got stress cracks in my frame and we temporarily got it welded up at a local shop until we can plate it later... and I broke my crossover steering bracket....again so we got that temporarily ghetto welded to get home untill we can beef that up too

Flex pictures!! Here are some pics of my trip to tuttle on 7-9-2005 there aren't very many b/c shortly after we got there my digi cam's batteries went dead. This is an obstacle called the critter getter, it is about a 4 foot tall straight up ledge. it took a little rock stacking but I eventually made it up on my own. We had to tie the rope to the bumper to make sure it didn't go over on me.

The rebuild page: I have an atlas II 3.8 sitting in here on my living room floor waiting for me to get home from school this weekend to put it in. I also have fullsize 63" chevy leafs and a ford 8.8 with 4.10's ready to go in this weekend too Here is another pic to compare the size of the two leaves Getting taken apart in the garage the atlas and the old autotrack Here is a mockup of the 63" chevy springs We got the atlas in for the most part but it is interfering with some fuel lines and electrical stuff..... I still can't seem to figure out why the cable shifters are like 3 MILES long....I have no idea how these are going to work.. Some new updates..... got the new wheels mounted Got the springs and axle mocked up and got the rear sitting on it's own weight so we could measure for driveshafts/brake lines and stuff new updates...02-26-06 I think I need a bigger garage.... another angle Got the driveshaft in MMMM.....twin sticks Well, I took it out for a shakedown run somewhere local and had a minor incedent I was coming out of a mud hole and hit the gas pretty hard to get up this really steep hill and I guess the front tires gripped really hard and I managed to break both front u-joints at the same time!! and my front axle is not locked.... haha, here in my new sticker :D

some old Offroading pics with my truck still on ifs Here is at the ledges where I went up at tuttle off road vehicle area. 1-02-2005 New offroading pics from my trip to tuttle orv area. The master mechanic himself (me) ripping out his cv shaft after he busted it. Here is the video where I busted it, if you listen closely you can kinda hear it pop. (right click and "save as") Movie

New Pictures from our trip to Disney, Oklahoma Lettin my friend Garrett play a litte... OMG, woman driver..... This is my truck on a tow truck after I stripped the ring and pinion in my rear axle.....whoops... Kansas rocks 9-10-05 Carnage canyon ripped a hole in the sidewall Kansas Krawl III at tuttle creek broke a u-joint not on the ledge pictured above but a different one (kinda mad I didn't get any pics of it) Here is some pics of the carnage from my latest trip to tuttle for the hangover krawl on 1-1-06 I got stress cracks in my frame and we temporarily got it welded up at a local shop until we can plate it later... and I broke my crossover steering bracket....again so we got that temporarily ghetto welded to get home untill we can beef that up too

Flex pictures!! Here are some pics of my trip to tuttle on 7-9-2005 there aren't very many b/c shortly after we got there my digi cam's batteries went dead. This is an obstacle called the critter getter, it is about a 4 foot tall straight up ledge. it took a little rock stacking but I eventually made it up on my own. We had to tie the rope to the bumper to make sure it didn't go over on me.