Last Updated 3/23/04

Page 1: New Pictures, after quick wax but got caught in the snow.
Page 2: First Z-28 Pictures and Basic Info
Page 3: After Market Parts List
Page 4: Previous Z-28/Porsche 944/ KX125/Old CarDomain Page

CHECK THE STUFF FOR SALE

ATTENTION F-Body Owners: I have alot of parts from my 1994 Z-28 leave a message in the guest book for the part you need and I will let you know if I got it to many parts to list.

Custom LT1 Engine FOR SALE (410HP*): Up for sale in the engine out of my 94 Z-28 it is a Long Block with Intake Manifold. It is a stock LT1 Block with LT4 Crank, Rods and Pistons, New Rings and Bearings, Lunati Timing Chains, Big Block Oil Pump, Hand Ported and Polished Heads and Intake Manifold, Three Angle Valve Job, Also has LT4 Hot Cam. This motor made 410HP* in my Z-28 with a CSI Electric Water Pump, SLP Intake with Twin K&N's, Cherry Bomb Exhaust, Stock Manifolds downpipe and cat and some NGK Plugs and MSD Superconductor wires. Great Engine ran perfect before removal. Only 4K Miles on overhal. Call me at 1(508)428-5842 or email me at camaro5842@hotmail.com. They engine is on ebay right now e-mail me if you want to make an offer or bid on eBay. (*All HP claims are made by a G-Tech with a few runs on the car, HP ranged from 402HP-410HP, the car was never dynoed.)LT4 Long Block Auction

17 Rims and Tires FOR SALE: Up for sale is a set if Weld Racing Evo rims they are 17"x9.5" in the back with Gereral XP 2000 P275/40ZR17 High Performance Tires that are in great condition, The Front is 17"x8.5" Dunlop SP Sport 8000 high Perfomance Tires that are in ok condition. They are a 2 Piece sytle forged aluminum wheels that look great. They only have a few curb marks and I photographed the one that is most noticable. There are a few other marks but only noticable under close inspection. These will fit 93-02 Camaros, Firebids and Trans Ams, also Most Vettes. Here is your chance to give your car that bad drag race look for a 1/4 of the new price, my loss your gain, e-mail me at camaro5842@hotmail.com if you have any questions. The Rims and Tires is on ebay right now e-mail me if you want to make an offer or bid on eBay.
17" Weld Rims and Tires Auction

Well I finally got the Z-28 and I had some free time so I washed and got to wax the front half of the car before it started to get dark and snow. We got a nice surprise when the Harmonic Balaner and Supercharger Crank Pulley fell off and we found out the balancer hub was ruined, the bolt holding ther balancer had worked it right and the previous owner tried to bullshit it on and lied to me about why the best was falling off. He tried to fix it and he wasted his time and mine trying to pin it on when all he need was a $85 keyed hub. But we are lucky there isn't more severe damage. I am going to purchase a keyed hub from Thunder Racing and hoplefully this will fix the problem. I have also bought a 2 Pillar Pod, BBK White Face Gauge Kit, Autometer 2 1/16" Air Fuel Ratio Guage and Oil pressure guage and 12Q of Royal Purple some K&N Oil Filter a New Huge K&N OFFROAD air filter it is over 12" long and a Fuel Filter and some Royal Purple Fuel System Cleaner. My plans are to put all that in and get the car running good and register it soon, I will get new pics of as the progress goes this were the best pictures I could get because it was getting dark fast.

Here is the new BBK white faces compared to the stock guages

Here is the radiator shround I just painted it up and put on some stickers of the stuff I got under the hood.

Here is the intercooler when I first took it out of the car.

Here is the intercooler after I stripped it and painted it red.

This is the Procharger Intake Eblow, it looked pretty shitty when I took it out and I buffed it out and put a clear coat of paint on it. Looks much better.

Here is my new K&N Off-Road Filter is is 12 1/8" long and a 3.5" inlet, it is huge, in the photo in the corner you can see a AA Battery, I didn't have anything else to compare it to.

Here is the my Pioneer DEH-850MP Head Unit it has alot of great features including the ability to play MP3 CD's.

Here is the White Face Guages at night.

Here are the 2 Pillar Guages I put in today they are AutoMeter Ultra Lite Oil Pressure and Fuel Air Ratio Guages. Both the shots are at night one is with the flash on.

I took off the valves covers to paint them red and I decided to take a picture of the 1.6 Ratio Roller Rockers I was told they were Crane Gold Rockers but they dont look like they are and sense I didn't install them i have no idea which ones they are.

I took some new pictures of the new work I have done to the Z. They are all listed below

Here is the engine after I removed everything I could and either polished or painted it red. I also mounted the MSD Ignition Boxes and removed the Fuel Pressure gauges from the hood and put it under the hood. Looks much better now the first pictures are to compare before and after.

I have done a lot of work on the interior there are some before and after shots let me know what you think in the Guest Book. I am planning on some Corbeau CR1 Carrera Blue and Black Seat and some Simpson 5-Pount Harness soon.

The cage is actually painted royal blue, it is much darker in real life.

Here is another shot of the Guages I installed in the place of the Heater controls you can also see my Pioneer DEH-850MP it is a MP3/CD Player with fully motorized face plate. Also there is some shots of the other gauges I added.

Here is a shot of what you will see when you pull up next to me at a light

Here is the Infinity Perfect 6.5� Compoents I installed in the back I mounted the crossovers above the speaker for look. You can also see my dual Stinger Distributions blocks with Voltmeters installed in the rear speaker panel. I still need to run the main power wire from the battery that is why it dosn't run into it hole. I just ran the wire out side of the car so I could test the new Perfect Component Speakers. I will be installing a set of Image Dynamics Chameleon Comps in the Front once they get Delieverd.

I also bought a 2000 Camaro SS Center console to go with the 6-Spd it is just sitting in there right now I have do decide how I will get it to mate to the 94 Z-28 Style Dash. Looks much better than nothing which was what was there before.

Here is the Stinger Fuse holder 200AMP fuse for the 3 Amps and the 0-Gauge Wire to power the 1900Watts

New stuff bought and or not installed and pictured:
Mcleod Twin Disk Clutt Kit
T-56 6-Speed Tranny
Image Dynamics 6.5" Chameleon Component Speakers
APC Chrome Fire Extinguisher
Fluidampr Keyed Balancer
Hurst Short Shifter
Custom Amp Rack

Page 1: New Pictures, after quick wax but got caught in the snow.
Page 2: First Z-28 Pictures and Basic Info
Page 3: After Market Parts List
Page 4: Previous Z-28/Porsche 944/ KX125/Old CarDomain Page