Update 8/26/04 Installed White face gauges, check page 5, soon to be install guide.
Update 7/31/04 ENGINE IS BACK IN!! Pictures on page 4! Also new parts for sale.
Update 6/22/04 Parts for sale pictures are up. Engine is done on thursday.... FINALLY
UPDATE 6/05/04 Engine is almost there, Heads and headers bolted up, block has been bored and setup for the 4-bolt main, intake is been portmatched
UPDATE 4/28/04 Updated pictures of engine bay, coming pretty well. UPDATE 2/17/04 - My Car is back from the engine remover, check out page 2 for all the pictures! Parts are now all on order and being brought to the engine rebuilder.
Hit up my guestbook and rate my car and ill hit you back.
This is my 1995 Trans AM/Firehawk Convertible. The reason why it is both is because originally it was a Trans Am. Then our dealership ordered parts for a totaled Firehawk from that year to repair it. Instead all of those parts were put onto my car.
Heres the shit thats get done to it :
BLOCK WORK
1. Blueprint and Balance
2. Boil install Cam Brgs. & Plugs
3. Line Hone
4. Mill Deck(3 sides)
5. Bore to 4.030
6. Block Plate Hone
ENGINE COMPONENTS
383 Stroker Kit
1. Eagle Forged 3.750 steel Crank
- Boil and Polishing
- Radius Oil Holes
2. 5.7 SIR rods
- Resizing big end alignment
3. SRP forged Piston indented domes
Air/Exhaust/Internals
1. Port and Polish Intake(red powedercoating)
2. AS&M 54mm Throttle Body
3. SLP 1 3/4 Mid Length Emittions Legal Headers(silver coated)
4. Borla Full Flow Cat Back Exhaust(installed)
5. TPIS/AFR CNC Ported Heads 187CC Intake runner, 2.02 intake/1.65 exhaust valves, .600 lift springs, Titainium retainers, 54cc chamber
6. Custom Ground Crower Cam - 230/236 114LSA .545/.555 lift
7. Comp Cams "R" Hydraulic Roller Lifters
8. Comp Cams Pro-Magnum Non-Self-Aligning Roller Rocker Arms, 7/16" stud, 1.6 Ratio
9. Ram Air Intake(stock)
10. Hypertech 160 degree thermostat(installed)
Fuel/Ignition
1. Bosch fuel Injectors, 36 lb
2. MSD 6A Iginition system
3. NGK TR55 Spark Plugs
4. MSD 8.5mm Super Conductor Spark Plug Wire
5. MSD Coil for dual connector GM Applications
6. Walbro High Performance In-Tank Fuel Pump, 255 liters per hour
Misc.
1. Computer tuning by PCM For Less
2. Spec Stage 3 Clutch
3. Mr. Gasket Steel Braided Hose Kit
4. SLP Underdrive Pully
5. SLP Air Temp Modual
Suspenstion/Wheels
1. Hotchkis Engine Support Bar(installed)
2. Hotchkis Torque Arm
3. Eagle F1 275/40Z/R17 Front
4. Eagle F1 P315/35/R17 Rear
5. Oz Racing Carbon Fiber Center Chrome Rims.
6. Bilstein Gas Shocks - Front and Rear
Sound System
This is all going in after the Engine
1. 2 Pairs Kenwood Excelon 6 1/2 speakers
2. JBL 2 Channel 1200watt Amp
3. 2 JL 10W6's 10" Subs
4. Pioneer 850MP Motorized Deck
PICTURES
Heres what the engine looks like now before all the work is done.
This isnt the best picture of my car, but its the only one i had on my comp, and i cant take any new ones any time soon because my car is at the engine shop.
Just took this pic of my rims, not the best picture but i had to take one in the garage for now because you guys wanted to see them a bit closer.
Engine is out, time to start cleanin it up.
