MODS:
Motor
CC 503 XE 224/230
Comp Pro Mag 1.6RRs with 9/16 studs
918 springs and accesories
Exhaust
Jet Hot headers and ORY
GMMG exhaust 5-20hp gain
SLP Stock Y-Pipe
Suspension
BMR Font 32mm orange sway bar w/Prothane bushings
BMR Rear 21mm sway bar orange w/prothane bushings
BMR Torque Arm orange
BMR tubular rear control arm orange w/polyurethane buhings
BMR panhard rod orange w/polyurethane bushings
Chasis
BMR Subframe Connectors (hugger orange)
BMR Shock-Tower Brace Hugger Orange
Drivetrain
4L60E A4/transgo shift kit
Stock rear
Intake
1LE throttle body elbow (up to 10hp)
SLP Cold Air intake (ram air stock)
Cooling
Hypertech 160* Thermostat (up to 10hp)/fan reprogram
Throttle Body Bypass ( up to 7hp)
Ignition
Taylor 8mm OVC wires/looms (red no orange damn)
NGK TR55 plugs
Brakes
OC Autosports SLotted/Drilled Rotors
Styling:
Orange SS Center Caps
Orange CAMARO bumper inserts
Calipers Powedercoated hugger Orange with white CAMARO SS decals
SLP Performance winshield banner
....remember that the HP rating are only greatest estimate and measured at the flywheeel not the rear wheels..so no bull....
Future Mods:
Heads and Cam
Stall
tranny cooler
larger injectors
D1SC
S/C 383 stroker(give me a few years)



GMMG Exhaust......

GMMG tips

SS center cap...tock replacement....old ones SS in orange faded away from years of breakdust remover

Orange CAMARO inerts

Engine bay

Air filter is the paper element...wanted K&N but they do not make them for these cars b/c of leaking seals causing dirt and other stuff to get into the engine.
I was looking at my engine one day just to c what things i have to remove to make my next mods....when i noticed somthing very strange...there was no silence tube on my throttle body elbow....i cam eto the conclusion (imn so smart) that i already have the 1LE throttle body elbow..some pics..



160* stat


fonts


rears


My Taylor OVC plug wire set and NGK tr55 plugs
Calipers waiting to be put back together and on the car


BMR shocktower BRace and Throttle body bypass


BMR rear control arms and Panhard rod


BMR torque arm


BMR sway bar links and 32mm front swaybar


BMR rear 21mm sway bar and Subframe Connectors