birkeland's 1996 Chevrolet Suburban on CarDomain

White guages are by APC, the noise filter is a little more visible. Pioneer looks nice in it's hole! The red switch is for an aux in. The aux in cable is stored in my ash tray. The knob is a bass controller I don't use anymore. I'm gonna put a directional LED in there to light up a new display I'm working on.

Here is the amp rack, and the other amps. When my 6 channel A/D/S comes in, I'll clean this up quite a bit. Power wire is 1 guage to the block, 4 out of the block to the amps. In front of the amp rack, you can see the leather case that holds my sun shade, and the cover to the amp in case I want to put it on. The lucite on the amprack just sits there, as the quick edge I used around the inside edge has great grip. So when I need to clean the plexi, it lifts off. There is also a 1/16" piece above the 3/8" piece that absorbs the scratches and is cheap to replace. Expoxy welded metal corners keep this layer in place.

This is what's behind the back seat. 3 Caps (these are going away when the 200 amp Alt gets purchased) and a Lanzar Opti 100.2 to power the components. The signal cables you see are for the subs. When the A/D/S gets here, this will all be removed (hence none of this is bolted down)