Interior upgrade
the BEFORE< and what I had to work with. makes myself feel good when I see these pictures of BEFORE
Ripped out the carpet, which consists of taking out the middle console. I aslo took apart practically the whole inside of the car, as I plan on to sound proff it with FAT MAT. As of tommorow december 14, 2003 I'm going to go to the wrecking yard as I found a camaro with black interior, and see if I can trade my grey interior peiece's in for the black interior pieces plus 25 bucks, I'll let you know what happens.
****************PRIOR TO BLACK INTERIOR SWAP, SOUND DEADENER********************
Febuary 22 2004
took a few days to lay FATMAT or dynamat inside my car. I got 100 square feet of it for only 120 bux american. for now i've done everything BUT the doors, and rear dip area. I'm now in the process of putting back majority of my interior up front and making plans for the seats to be mounted. here are the pictures of the fatmat
*****************LED and NEON installs********************
Here below is a picture of an LED electrode. I took out all my vent shades, sprayed the inside with my chrome duplicolor paint, so it would reflect, and drilled a hole in each vent space for the LED to fit through, now with a flick of the switch the vents glow blue, you can easily enough just close particular ones, or just shut them all off, also I installed one in each door handle so the door handles glow blue, I'm wondering if I should hook those up through the lights as well, so they will always be on at night, but it might be irritating. so I probably wont
also some pictures of my night shots iwth my BLUE LED's in my dash vents
****************THE BLACK INTERIOR IS IN, with racing seats too************
installed my APC G3 racing seats made of black swade. totally sweet. I had to make custom brackets for these, what a pain in the ass. passanger one is about an inch higher than the drivers. they are very wide, they rub against the consol and door. but they look and feel awsome. there is no backseat room now. hope you enjoy. if you have questions about these let me know. cheers
march 25 2004
again another night, I took some pics from the driver side, one with the flash so you see where the actual light is comign from, and one with out
************** TACH INSTALL*****************
hey guys, I just installed my autometere monster tachometer into my car, its a 5" silver-o-lite with a shift light. going to be replacing the illumination bulb with a blue bulb and a blue shift light. let me konw what you think. cheers!
*notice the finger drawing on hood for my future SS hood LOL*
ok ok its been a year since then or longer!, I've changed guys, dont worry for those of you who might have been disgusted by that tachometer install I have relocated it and I LOVE where it is now, here is a picture:
***********ARM REST REPAIR*************
just finished FINALLY fixing the BLACK arm rest repair. no more ugly grey ones on black interior. all you have to do. to repair that warped from the sun look, is get some JB WELD. I used one package (pack of 2) per side. mix it up. and then smere between vynle and plastic moulding(you have them off the car), and then try some how to make sure the vynl which is SUPPOSED TO BE SEEN is all the way to the edge where it woudl be flsh against your door panel. or else you'll see some martial which is still vynle but not supposed to be seen and has crease mark. anyways then you get a piece of wood a small one by 2 will do or 1 by 4, and on each side (top and bottom if mounted) put the wood there, and have some C clamps to clamp it, 2 of them works good, let sit over night. take off the next day and man, look at that!!!!!!!! just like these.....
Table of Contents
Home
Tail Light Covers
Interior Updrade <<<<
Stereo Installation
White Faced Overlays
Headlight Updgrade
Grill Modification
Chassis
Clear Front Signals
Spoiler Upgrade
Chassis
Motor build
