This page is for my audio and the other cars G-Boys boxes has done. If you are interested in any of these installs. Contact G-Boys at this number (248)761-8619. We can help you out with any of your car audio problems or do a box or install for you.
New Indash TV The Pioneer AVH6550DVD

This is a picture of my trunk as of 2005, I took out the 10 inch tv and went with a smaller 6.5 on my trunk lid.

Put a 7inch tv in each rear window

A look at the TV install from inside the car.

This is a pic of my box. I bought a Kicker ZR 600 amp for my MTX Thunder 8000. And also added a 10 inch TV for shows.

This is new fiberglass box for my Mustang. There Is about 80 man hours in the building of it. It is very simple and light for my car and has a great sound. That was what I was looking for.

Its a very simple install. using 1 MTX Thunder 8000, an MTX 4020 amp for the front mids which are MTX Thunder 6000 6.5 comp.as the same in the back. A PPI1800 runs the sub. A Pyle 5.6 inch TV with DVD player is up front. Its all powered by Lightnig audio wire.
This is my new project that I am working on right now. The box is made of MDF and fiberglass. Right now there are 3 layers of glass and one layer duraglass the made the box stronger. The new step is to put on the bondo, will be shown very soon. The box is built for two 12 inch Audiobahn SE subs

The TV in my dash.

DVD Player in the rear seat.

This box was made for 2 Memphis Audio Power Reference Subs. It's sealed for each sub and has 1.53 cubic foot per Sub. The M in the middle of the Box lights up blue.

This is a fiberglass box made for a 10inch MTX Thunder8000. The box has 1.12cubic Foot. It is for sale. It can be covered in carpet, vinal, or painted. Give me an offer.

This is a box for one 15 Memphis audio sub. The box is 3.76 cubic foot ported and tuned to 37hrz.

his is the old box for my Mustang. It has one 10 inch MTX Thunder 8000. The box is 1 cubic foot. Made of MDF and covered with vinal.

This is a back board for a 1968 Mustang. Its made of fiberglass and bondo. It's for two 6 by 9's. It will be covered with vinal.

I now Mass produce these now. If you have and older Mustang just give me a call

Edges bondoed

This is a work in progres. It for any 1994 and up Mustang. For one 15 and it will be 1.25 cubic foot. It will be for sale when done. Give me an offer.

The mold cloth has been aplied and resend.

First layer of mat

After three layers of mat. Testing to see how it's going to look. This is not the sub I will be using for this box.

Four layers of mat have been layed and sanded.
Bondoed and sanded.

Test fit in the Mustang. This is the Mustang that this will be put into. I'm going to mold the amp in the back of the rear seats.

This box is made for 3 10 inch subs. 3.75 cubic feet and ported and tuned to 35 hrz. This box is for sale. Can put any color carpet on it. Make an offer.

This box is for 2 Alpine Type R's. Powered by Two Audiobahn Amps
My new 15 inch shocker Super Extream. I'm build a box for it right now. It will be powered by a viper 1200.

This is a 1.25 cubic foot boxs for one 12 inch old school Kicker solo.

This is a new project that I'm working on. It's a disply for sirus radio.

The TV mount

This was the first ever box that I built. I built this when I was a Freshmen in HighSchool that was about 4 years ago. The system was a very cheap. Only coasting about 175 with the headset. But it sounded good for how crapy it was.

A pic of it installed.