10vt Engine continued
Stage 2
this is my "new" intake manifold and custom intercooler that i had welded up.the intercooler is two saab 900 cores with "derekmade" endtanks..lol.
the intake is from a KH code turbo engine. it had to be retrofitted with a TPS for the 034 computer. i chose the KH over an MC intake for fuel rail clearance...and it's still tight in there.
here's my custom cross
member for the front. it gives the necesary room to fit an intercooler in there.
and these are the brackets to hold the I/C in place (note, they aren't finished yet :)
here's some more random pics for you to think on. i know i like to see other peoples ideas and how they do stuff when it comes to being creative.
intercooler is in and done!!
well, finally everything is in and it fits pretty nice.
talk about close clearance!! there is about 3/8ths of an inch in there. i made a strut bracket to hopefully keep the pulley from interfering with the intercooler if i somehow bump into something.
and this is how i chose to aid airflow to the upper half of the intercooler core.
here it is all buttoned up, no one's the wiser about what might be lurking under my hood :)
Menu
page 1 :Intro,Updates
page 2 :Exterior
page 3 : Exterior Continued
page 4 : Interior
page 5 : V8 turbo project
page 6 : Brakes and Suspension
page 7 : 10vt Engine
page 8 : 10vt Engine continued
page 9 : A8 motor swap
page 10: 5lug brakes and suspension
page 11: Empty
page 12: Racing- Drag Strip, Driving School @ Thunderhill raceway
page 13: Other peoples cars, cool stuff, etc
Bookmark this Ride