MODIFICATION TIMELINE
(?/?/03): Here are pics with the two different wheels, so you can compare it side to side (vote which ones you like better)
The 10-spoke wheels came free with the new tires so I couldnt really turn them down, and Im going to be using them regardlessly. (I prefer the 5-spokes) Keep in mind the wheels are the same size (17") even though the pics make the 10-spokes look bigger.
(came on car): Interior (note the '02 seats :D )
(came on car): Subframe Connector and SLP 2OTL:
(2/28/04): Painted Subframe Connectors:
(3/8/04): DMH E-cutout and Manual Fan Switch with LED's
note: that isnt my pinion seal leaking, its a stain from when I changed the fluid.
Ill take pics of the fan switch LED's soon... I was having a problem with the low speed LED which I finally got fixed.
(4/15/04): Tinted Corners, and side markers
(5/5/04): SLP CAI complete with ugly ancient black paint... Ill take a pic as soon as I sandblast and polish it. :)
(7/15/04): Havent updated in a while, got a lot to put on here...
Here is a pic of the engine bay I detailed today, there you'll find the CAI i mentioned above [2 months ago]. I plan to sandblast it down and repaint it or powdercoat it.
!heatshield mod... really cleans up the bottom of the hood. Probably cooled the engine bay temps down a bit too
JL stealthbox loaded with a 10w3d2. Its a 10" dual voice coil (dual 2 ohm) and its powered by a rockford P2002 which makes 200w x 1 at 4 ohms.
Here is my amp volume knob, and my fan lights which I have working now... the fans are on high in the pic, and both lights are on (hard to see cause of the flash) You can also see the hurst knob on my pro 5.0 which I have never taken a pic of.
I got the rear hatch done in 5% tint. I got it done at darkside, they did it in three strips, but did a really good job. You would never know it was done in three strips. The bubbling, which you see in one of the pics, is supposed to go away after a few days. If it doesnt, i guess ill be taking it back.
(8/5/04): The CAI is polished and ready to be painted anodized red...more pics will be coming shortly, and I will probably be doing the same thing to my strut tower brace.
(8/14/04): Here it is:
(10/17/04): Well its about a month into college, and im really starting to miss this thing. Here's the latest picture I have of it
(2/7/05:) finally got around to anondizing the stb. im really happy with the way it came out with the exception of the fact it doesnt quite match my cai. also did the free foglight/highbeam mod.
(7/25/05?): Spec Stage 3 Clutch
Stock Clutch and Pressure plate (in good shape yet)
New Spec 3 disc
NEw Spec three Pressure plate and disc
(9/25/05): SS HOOD!!! (test fit)
More High quality pics here
(12/20/05): Pacesetter Coated Longtube Headers. Finally! (although it will probably be another year before they are on the car :/ )
(12/20/05): Anodized Calipers (not done yet)
im ditching the old farm tractor red for something a bit more classy:
before:
halfway done:
yea... those are metal shavings all over the car - sends a chill down my spine.
