This is a couple of shots from when I removed the factory a/c. I removed it because I liked the room and cleanness it gave the engine.After I installed the non a/c box. Much cleaner look.BMR boxed lower control arms compared to stock. boxed construction, smaller bushing, and it is polyurethane. Stock lowers and BMR lowers installed.After I installed the lowers I still had wheel hop. I looked at the lowers and and realized that they were angled wroung. They are supposed to be lower at the axle then the chassies. So I bought the BMR relocation brackets had them welded on and that solved my wheel hop! This is a center console from a 97 Blazer. First I adapted the shift cable to mate to the blazer shifter. Then I trimmed the console to fit over the Monte hump. I dyed it and put some fabric on it. Last I attached the wires.