DROP ME A LINE AND LET ME KNOW WHAT YOU LIKE OR DON'T LIKE!!!
v-tec's are fine if you want to run 14's for the rest of your life. Get a real car get a NISSAN!!
1. Specs
2. Pictures
3. (NEW) AutoX Pictures
4. Custom Rocker Blockers, Port-Polish,
forged piston & Rods, innercooler, and intake
5. ROLL CAGE!!
6. New motor in car and freshly painted engine bay.
7. Pictures and Misc.
8. About the Ultimate street car challenge (must see)
Well i got new turbo on and the damn thing is a monster. I dynoed and tuned it to 375HP on 22 lbs of boost. i will have new dyno sheets posted soon along with 1/4 mile time slips.
This is my official time slip of 11.831 at 114 mph and i was on the brakes and still broke out. I am #241 on the right hand side. I'm working on getting a better copy.
This is my official dyno chart
These pics are my dial in time of 11.85 on a different day that is why it is a different car #
My NX2000 was in the top 82 for the Ultimate Street Car Challenge. I have what it takes to take it all the way. I have the power and the skills. Unfortunately I was not voted to the top ten but I'll be there next year just watch.
For you people out there that think mommy pays for all this. My car has never been to a shop. I do everything myself, Fibergalss work, engine work suspention, interior, audio, EVERYTHING!!
Engine:
bluebird Sr20DET
T3/T4 Turbo
Forged pistons & rods
75 pound an hour injectors
SDS engine management
Custom tubular intake manifold
Custom Exaust manifold
Custom Intercooler (upgraded to a bigger one)
Complete 3in. exhaust
3in. HKS muffler
High flow CATCO cat.
Under drive pulleys
Ceramic clutch up to 500 ft. lbs. tq.
Stock posi tranny (blew one already)
Short shifter
2 Permacool 10 in. fans
Urethane Motor Mounts
Walbro 255 fuel pump
65 MM Throttlebody
3/8 fuel line
Port and polished heads
Custom Made Rocker Blockers
and on and on and on...
Suspension:
KYB struts (upgrading to some type of adj's)
Suspension Technique sway bars
Willwood 4 piston calipers (front)
Maxima calipers (back)
Brembo 11 in. rotors (front) cross drilled slotted
Brembo 10 in. rotors (back) cross drilled slotted
Urethane Bushings
Maxima master cylinder
Stillen front strut brace
New 18" billit wheels w/big brakes
Interior:
Roll cage
5 point harness
Custom Autometer gauge cluster
My big ass 200MPH Speedo
gti-r seats
MANY MORE TO COME!! AND LOTS NOT LISTED.
1. Specs
2. Pictures
3. (NEW) AutoX Pictures
4. Custom Rocker Blockers, Port-Polish,
forged piston & Rods, innercooler, and intake
5. ROLL CAGE!!
6. New motor in car and freshly painted engine bay.
7. Pictures and Misc.
8. About the Ultimate street car challenge (must see)
