Page Nine - Rear brake upgrade
Here are the parts for my rear drum to 98+ "LS1" rear discs 12x1.0" upgrade
Above: Here's what the drum brakes looked like with the drum removed.
Above: The disc backing plate c-clamped helped center where the holes were to be drilled. 3/8" cobalt bit was used. The axle was taped over to prevent metal shavings from getting into the rear or axle bearings.
Above: The top flange cut and holes drilled.
Above: The disc brakes completed.
Easton posi, 3.42 gears and Superior axles installed:
----------
Page One - Introduction
Page Two - List of orig options
Page Three - Current mods
Page Four - Interior
Page Five - Audio
Page Six - Exterior
Page Seven - Engine
Page Eight - Front brake upgrade
Page Nine - Rear brake upgrade
Page Ten - My computer
