2004 Saturn Vue Redline
So far I have removed the tacky gold and red pin stripping on the car. I also removed front plate braket.
I have already ordered some parts to customize it and hopefully I get the parts soon.
The parts I have orderd or have put on are as follows.
Black TYC Taillights, 7500k PureBlue Halogen Lowbeams, Hyper white High beams & fog lights, Chrome amber turn signal bulbs, Led plate bulbs, Led backup bulbs, Led Fog lights, Cross drilled rotors w/ ceramic pads, Cold air intake, Flowmaster super 40 muffler, Magnaflow 4" ss tip, and a Painted Rear Spoiler.
Things I plan to get: Real Aluminum dash kit, 22" Rims, Springs and maybe more...
Some cost freindly mods I plan to do is Tint front corner lenz, Tint rear bumper reflectors & 3rd brake light. Remove all Saturn Badges.
Im sure my Redline will be a one of a kind as all my vehicles get customized. Check my Garage out and see for yourself.
HYPER WHITE HIGH BEAMS PURE BLUE LOW BEAMS
STOCK AND NOW
Chrome turn/parking bulbs
__________________________________________________
BLACKED OUT AMBER CORNER LENZ & 3RD BRAKE LIGHT
1. PREP SURFACE WITH SCOTCH PAD 2. CLEAN W/ PREP CLEANER, WAX/GREASE REMOVER 3. SPRAY TINT IN LIGHT EVEN COATS, ALLOW TO DRY FOR LIKE 10-15 MIN. BETWEEN COATS. BUILD UP AS DARK AS DESIRED I DID LIKE 4-5 COATS ON THESE 4. REPEAT STEP 3 WITH CLEAR COAT .
BEFORE & AFTER
_______________________________________
SPOILER INSTALLED
________________________________________
TYC BLACK TAILLIGHTS INSTALLED
BEFORE & AFTER
_____________________________________________
COLD AIR INTAKE INSTALLED
BEFORE & AFTER
_________________________________________
CROSS DRILLED ROTORS & CERAMIC PADS INSTALLED
BEFORE & AFTER
______________________________________
EXHAUST
HERE IS THE EXHAUST IM DOING. I WAS GOING TO GET THE MAGNAFLOW CAT BACK KIT ON EBAY THAT COSTS CLOSE TO $600 BUT DECIDED TO TAKE A DIFFERENT ROUTE AND SAVE SOME BUCKS. I GOT A FLOWMASTER SUPER 40 MUFFLER AND A NICE MAGNAFLOW 4" POLISHED/STAINLESS EXHAUST TIP.
IM GOING TO REMOVER THE RESONATER FROM THE CENTER OF CAR AND PUT THE FLOWMASTER THERE. THEN IM ELIMINATING THE STOCK MUFFLER FROM BEHIND THE REAR BUMPER AND JUST HAVING PIPE PUT IN WITH MY STAINLESS 4" TIP.
IM CURIOUS ON HOW THE FLOWMASTER WILL SOUND ON A HONDA ENGINE... THIS SHALL BE INTERESTING...I WILL POST PIX AFTER INSTALL IS COMPLETE.
