Posted by: DWWag

12/08/2009 09:43AM

cool third cobalt tailight want one for mine

Posted by: slvr05LS22

12/03/2009 12:15PM

the headlights are easy... you want to back them in your oven at 200 degf in 15 min incriments never more. The apoxy the factory uses will become workable after its hot enough then you just work your way around the lens with a flat head be sure to remove all screws holding it on too. As the headlights cool the apoxy rebonds so you have to work somewhat fast but if it cools just throw it back in for another fifteen minutes.once you have the housing apart clean the inside of the lens and wipe down everything you want to paint really well with denatured alcohol to help the paint adhere. I used a high temp engine paint and it's held up for 5 years now. Do not remove the apoxy once you have it apart try and keep it in the grooves where the lens and back housing meet. when your paints done drying and curing heat the back housings up again and squish the twon halves back together and wrap them tight with either painters tape or rubber bands to help ensure a good tight fit so you don't have leaks. Enjoy! lmk if you need more info...

Posted by: slvr05LS22

11/30/2009 09:50AM

the supercharger sounds nice, has a crazy whine to it, I'll upload a video....super easy to install, and not that pricey! don't waste money on an intake, make real power!Looks clean though! Keep it that way, no rice for american cars!

Posted by: ABCobalt

11/24/2009 03:58PM

The intake sounds nice. It's got a nice growl to it but is a little spendy. Pretty easy to install though. I will try to upload a video of it.

Posted by: jmc9981

10/09/2009 02:25PM

Those black outs look sweet 5 stars!!!