My 2002 SC2
Mods list
Engine:
*(NEW) Pics coming soon of custom Intake manifold mods
*.40 Bored 99+ Pistons w/ 11.1:0 compression
*Lightened and knife edged 99+ Crank and BALANCED
*Crower Cams @ 231 In, 229 Ex Duration
*bored Valve ports w/ three angle Valves and High Temp super seals
*99+ SCAT Rods w/ main bearings and BALANCED!!!
*Decked head .40
*Port Polishing on exhaust side/Port Matched and tapered on intake side
*Ferrea Valve Springs
*Ported SDA Manifold
*SDA Bored TB
*SDA TAM and Dogbone Mounts
*MSD Coil Packs w/ Magnecore 8.5mm wires
*NGK Plugs
*EGR eliminated
*burned a VALVE straight through i went back to the SAFC-II its more convient but the MEGASQUIRT V2.2 was a HUGE waist of money and is not good for elevation changes if your street to strip and minor super turbo or a hard core N/A stick with the SAFC-II
*w/ AEM WBO2 and exhaust temp sensor
*SX Fuel Pump
*RC 27 LBS Injectors w/ Bored Fuel Rail and SX pressure regulator
*Reversed Flow water pump "enters the Head first (fail)"
*Lightweight Fidanza Flywheel and OBX Underdrive pulley
*DYNO custom Mandrel bent Exhaust 2.25"-2.5"
*OBX 4-2-1 Headers w/ GReddy resonator
*AEM CAI/SRI custom
*194 HP @ 6100RPM
Transmission:
*ACT Stage 2
*Re-built Godspeed transmission w/ welded diff pin
*VXB Bearings
*Steel Shimmed Syncros
Suspension:
*Ground Control Adjustables 1"-4" Drop
*KYB Absorbers
*Prothane Bushings "Trailing arms and control arms"
*VXB Wheel Bearings "These will not blow out"
