Ok, so i wanted to add a turbo, but i have over a 1/4 mil on this baby so i will be doing an engine and tranny rebuild first.
Good old focussport stage 1. good for 7 psi. I dont want anything larger unless i change my compression ratio down a few.
But before i start all that, i gatta wait for better weather.
So i started on wiring and guages. I plumbed a vac line for a boost guage and ran a direct wire for my volt meter. (comes in handy for spl's) GO STOCK ALT GO !!!
I decided to also start re-doing some the the fabric colours in the car.
So heres some hints for installing a custom "A" piller guages.
1. run your lines for the guages you will be using. And select location for guages. make on the piller location of the pods.
2. If you want to now is the time to paint or apolster the a piller. I used a grey fabric thats has some stretch to it, it makes it easier to conture to the shape desired.
3. I used spray adhesive to attact it to the piller being carful not to over soak the piller, If too much glue is used it will soak through and look like a shit job.
