UPDATES ARE ALWAYS AT THE TOP OF THE PAGE!

HERES THE MOST RECENT PICTURES OF THE ALTI. IF YOU CLICK ON ANY OF THE PICTURES ON THE PAGE THEY WILL HAVE A MORE LARGER AND CLEARER PICTURE.

PUT SOME STICKERS ON THE REAR WINDOW FOR THE FAM AND CAPOEIRA BRASIL.

ON THE NEXT TWO PICTURES YOU CAN SEE THE CHROME DOOR EDGE GUARDS I HAD TO PUT FOR THE KIDS OF COURSE AND YOU CAN ALSO SEE THE OEM SIDE MOULDINGS WITH THE CHROME INSERT WHICH I HAD NOT PUT BACK ON THE CAR YET AFTER GETTING IT BACK FROM THE PAINT SHOP. HERE YOU CAN ALSO TELL I PAINTED THE CALIPERS AND ROTORS.

ALL UPGRADES OR CHANGES DONE TO THE VEHICLE I DID MYSELF, EXCEPT FOR THE PAINT. WENT FROM STOCK TO LOWRIDER, THEN BACK TO STOCK  AND NOW DUB. NO MORE LAMBO DOORS, JUST GOOD OLD OPEN AND CLOSE DOORS AGAIN. GOT THE HINGES UP FOR SALE AND CUSTOM TAILLIGHTS, PM FOR PRICES.

HERES THE WHEELS ON THE CAR DURIN THE DAY. ITS 22 INCH U2 007 WHEELS ROLLIN ON HANKOOK VENTUS 245/30Z/R22

HERES A BETTER PICTURE OF THE CHROME PILLARS AND INTERIOR.

THIS IS THE 22 INCH WHEELS I JUST PUT ON THE CAR THIS PAST TUESDAY. THEY FIT GOOD AND DIDNT RUB EXCEPT WHEN TAKING SHARP TURNS OR HITTING BIG DIPS. BUT AFTER CONSIDERING GROCERY SHOPPING AND HAVING THE KIDS IN THE BACK, I DECIDED TO GIVE IT A TWO INCH LIFT IN THE BACK FOR GOOD CLEARANCE. WILL HAVE GOOD PICTURES UP THIS WEEKEND, BUT HERES WHAT IT LOOKS LIKE.

HERE ARE THE PICTURES OF THE CAR DURING THE DAY.....REALLY NO SUNLIGHT OUT, BUT YOU CAN KINDA SEE THE BLUISH IN THE PAINT NOW.

HERE YOU GOT A CLEAR VIEW OF THE TRENZ GRILL I PURCHASED AT THE NISSAN DEALER BECAUSE I DID NOT LIKE ANY OTHER ONES I HAD SEEN, BEST QUALITY AND FIT. MOUNTS RIGHT IN WITH NO MODIFYING OR SCREWING AND NOT TO MENTION EXPENSIVE. THE NISSAN MURANO GRILL EMBLEM I PUT ON IT IS 2 1/2 INCHES BIGGER THAN THE ALTIMA EMBLEM. I HAD TO MODIFY IT TO MOUNT IT TO THE GRILL

HERE IS A BETTER PICTURE OF THE M3 MIRRORS, CHROM PILLARS AND CHROME REAR ROOF/QUARTER MOULDING. STILL GOT TO PUT THE DOOR MOULDINGS BACK ON WHICH HAVE THE CHROME INSERTS ON THEM.

HERE YOU CAN SEE THE WOODGRAIN KIT I INSTALLED AND HOW I PAINTED THE CENTER AC VENT PANEL WHITE FOR A LITTLE CONTRAST ON THE DASH, AND THE CHROME HANDLE ON THE SHIFTER. INTERIOR WAS DETAILED WHILE AT THE PAINT SHOP SO IT ACTUALLY ALMOST LOOKS LIKE A NEW INTERIOR AS WELL.

ALSO HAVE CHROME TIPS ON THE EXHAUST

WHEEL WELLS ARE BACK TO BLACK, NEXT IS THE 22'S

BELOW YOU SEE THE NEW LOOK TO MY WIFEYS 04 NISSAN ALTIMA 2.5S, NO LONGER HAS ANY PINSTRIPING OR LEAFING ON IT. IT WAS RECENTLY REPAINTED WITH THE 09 LEXUS BLUE PEARL. I WILL BE RETAKING PICTURES IN THE DAY TIME TO SHOW OFF THE COLOR MORE.

NEXT YOU'LL SEE THE NEW ANGEL EYE HID PROJECTOR HEADLIGHTS WITH CLEAR SIGNAL LENSES AND FACTORY FOG LIGHTS I INSTALLED. THIS CAR CAME WITHOUT FOG LAMPS FROM FACTORY. HERE YOU CAN SEE THE ANGEL EYES FULLY FUNCTIONAL ALONG WITH THE FOG LIGHTS THAT HAVE SUPER WHITE BULBS. I ALSO UPGRADED THE SIGNAL BULBS TO ORANGE L.E.D. TO REPLACE THE ORIGINAL AMBER BULBS. ALSO HERE YOU CAN SEE THE TRENZ BILLET GRILL WITH A NISSAN EMBLEM FROM A MURANO WHICH I POLISHED UP.

NEXT YOULL SEE THE HID PROJECTOR LIGHTS FULLY FUNCTIONAL. THE PROJECTORS HAVE 10000K BRILLIANT BLUE H7 BULBS LIGHTING THEM UP. I REWIRED THE BALLAST TO PLUG STRAIGHT INTO THE ORIGINAL WIRE HARNESS ON THE CAR.

HERES THE SIDE VIEW WHERE YOU CAN SEE THE M3 SIGNAL MIRRORS THAT I HAD PAINTED TO MATCH THE CAR LIT UP. I RAN THE WIRING FROM THE FRONT HEADLIGHTS TO THE MIRRORS FOR THE SIGNAL LIGHTS, I ALSO HAD TO REWIRE THE ELECTRIC MIRRORS TO WORK WITH THE FACTORY MIRROR CONTROL SWITCH.

HERE YOU CAN SEE THE NEW OEM STYLE WING I INSTALLED ON THE TRUNK LID. THE CAR CAME WITHOUT ONE FROM FACTORY, SO I DECIDED TO PUT ONE FOR A SPORTY LOOK. I RAN THE WIRING FOR THE LED BRAKE LIGHT ON THE WING MYSELF TOO.

HERE YOU CAN SEE THE ALTEZZA CHROME TAILLIGHTS THAT I PUT ON THE REAR IN PLACE OF THE CUSTOM LIGHTS I HAD MADE FOR THE CAR BEFORE. THESE TAILLIGHTS HAVE CLEAR SIGNAL LIGHTS. YOU CAN ALSO SEE HERE THAT I SHAVED THE KEY HOLE OFF ON THE LICENSE FINISH PANEL FOR A SMOOTH LOOK AS WELL. ALSO LEFT OFF THE OEM EMBLEMS AND ONLY PUT THE FISHY TO SHOW OUR CHRISTIAN FAITH. 

HERE YOU CAN SEE THE RED LED BULBS I PUT FOR THE SIGNAL LIGHTS AND BRAKE LIGHTS. I ALSO SWAPPED THE BACK UP BULBS AND LICENSE PLATE BULBS WITH BLUE LED BULBS

HERES THE NEW LOOK OF THE TRUNK, NO MORE HYDRAULIC SETUP. I ALSO DID THE WIRING FOR THE STEREO. I RAN 0 GAUGE RED WIRE FROM THE FRONT TO REAR FOR THE POWER. IN PIX 1 ONLY THING VISIBLE IS THE CUSTOM FIBERGLASS BOX I BUILT THAT HOLDS 3 FOSGATE 10 INCH SUBS, PUSHED BY A 1500 WATT FOSGATE AMP THAT IS MOUNTED ON THE FLOOR TO THE LEFT, AND IS POWERED BY A 2 FARAD LIGHTNING AUDIO DIGITAL CAP MOUNTED IN THE TOP OF THE TRUNK ON THE REAR DECK. IN PIX 2 YOU CAN SEE I PUT IN A BLUE TUBE LIGHT IN THE BOX TO LIGHT UP WHENEVER THE TRUNK HAS BEEN POPPED OPEN.

THIS WAS THE FINAL TOUCHES TO THE LEAFING AND STRIPING I DID MYSELF BEFORE WE FINALLY DECIDED IT WAS TIME TO REPAINT THE CAR AND PUT IT BACK TO STOCK FOR THE FAMILY.

HERE YOU CAN SEE AFTER I PAINTED THE WHEELWELLS WHITE AND ADDED SOME STRIPING DOWN THERE TO SHOW OFF WHEN THE CAR WAS LOCKED UP.

HERES A FEW SHOW SHOTS OF THE CAR AT THE LOWRIDER SHOWS.

HERE YOU CAN SEE THE FINAL TOUCHES TO THE TRUNK. BY THIS SHOW I HAD STARTED PINSTRIPING AND ADDED MORE TO VEHICLE MYSELF ALONG WITH LEAFING ACCENTS. EVERYTHING WAS DONE IN MY GARAGE. NEW BATTERIES, NEWLY PAINTED BATTERY TIE DOWNS AND HARD LINES, AMP MOUNT AND CUSTOM FIBERGLASS BOX WITH PAINT TO MATCH AND PINSTRIPING TO MATCH.

THIS WAS HOW THE SETUP LOOKED BEFORE THE TRUNK WAS FINISHED. THE SETUP WAS PROVIDED BY SCOTT AT REDS HYDRAULICS, AND WE DID THE INSTALL AT HOME IN MY DRIVEWAY ON A WEEKEND. THE SETUP INCLUDED WHAMMY TANK WITH REDS PRO SERIES PUMPS, HARDLINES, SIZE 8 CYLINDERS TO THE FRONT AND SIZE 10 TO THE REAR WITH 4 BATTERIES AND 3 SWITCHES.

MINOR PINSTRIPING WAS THE FIRST MOD DONE BY DANNY D. THEN I DID THE JTEVO LAMBO DOOR KIT INSTALL AT HOME ALONG WITH THE FLIP TRUNK. BY THIS SHOW I HAD PAINTED AND DETAILED THE ENGINE BAY, ADDED THE CHROME MOULDING PACKAGE AND MADE MY CUSTOM TAILLIGHTS PAINTED TO MATCH THE CAR.

HERES WHAT THE CAR ORIGINALLY LOOKED LIKE. PLAIN JANE WITH OUT ANY CHROME AT ALL. BEFORE I ADDED THE CHROME MOULDING PACKAGE MYSELF AND EVERYTHING ELSE.

NO CHROME MOULDINGS ON THE DOORS, SWAPPED THEM OUT LATER TOO.

HERES THE ORIGINAL LICENSE PLATE BEZEL, NO CHROME. SWAPPED IT OUT LATER.