1936 pontiac  starchief  8

heres some pictures of the pontiac I am working on. It was brought to me needing everything and I mean everything. I started by cutting off the used mustang II susp someone welded in totaly wrong and boxing the frame. The upper spring hats were forward 6 degree when they should be .5 degree back sitting at ride stance. The engine mounts were, well I'm not sure what they were. I am making headway on it so check it out and see what you think

heres what the frame looked like.

 All sandblasted and primed.

heres some shots of the boxing plates, boxing the rear section and the rear susp

Fatman coil over stainless upper and lower control arm suspension. looking down at front

crossmember and steering rack

trans crossmember fabed up for the TCI 700r streetfighter trans from  the boys at jeg's. next is the power brake set up I fabricated under the floor. notice the brake arm will mount on the inside of the frame rail. brake arm will have bearing supports on the outer and inner frame rails.

heres after widening the inner fenderwells for the big 295/50R15's

I think the car is going to be pretty cool. page 2 will have more interior pictures and  some patch work.