MY TALON ESI - T --> ECLIPSE CONVERSION 420a
Interior
Sparco Torino's
Sparco Steering Wheel
Ractive Shift Knob
Pionners: Three ways Front: 6 1/2 Back: 6 x 9
6.5 inch Touch screen Jensen Media Center
Dual 12 inch Kicker subs and box
White Glow Guages
Royal Black Custom Carpet swap
GSX Black leather rear seat swap
Exterior
Blitz Body Kit
Projector Halo Headlights
Carbon Fiber housing Taillights
Carbon Fiber evo hood
Enkei 17's
Blue Neons
Performance
Suspension
Tokico HP Struts
Eibach Sportline Lowering Springs
Cross Drilled Rotors
Cold Air Intake
Full Catback 4 inch exhaust
Front strut tower bar
NGK spark plugs
Stainless Steel Header
Stage 2 Clutch
Recently Added 2009:
Hahn Super 16G Mitsubishi Turbo
Hahn Turbo Manifold
Intercooler 7" x 27" x 3"
Walbro 255LPH High Pressure Fuel Pump
Vortech 12:1 Fuel Management Unit
1G DSM BOV
GLOW Shift Gauges
B&M Short Shifter
This is the oil feed line... I tapped into the back of my block and teed off so i can keep the stock oil pressure switch on straight ; )
This is the return line from my turbo to my oil pan... Twas a pain to doo
This is my OBX FMU... I purchased it off ebay but the lines were threaded instead of having a nipple end like the vortechs... Couldnt find the female ends at home depot so i headed over to a local Performance Improvements and purchased Russel fittings..
My turbo was used when i bought it soooo.. Steel brushed it with varsol ; ) , primed and painted that shiat... Looked great btw
Took this pic right after i installed the turbo... Looked prettay saweet
This was my stock fuel pump in its housing.... The Walbro pump is on the right
This was right after I installed my intercooler... Yeahh.. It lookes a little uneven in the pic.. but leveled it nd now its all goodd
I just installed my gauges... Got them from glowshift.... Tinted Series
These are the finished pics. I had just installed my turbo timer aswell... I picked up an HKS type 1 timer off of kijiji for 60 bucks... Didnt include the harness tho... I went to speedtech and ordered an HKS MT-6 plug and play harness which worked out really well.. Made the installation much easier
I'm almost finished my piping... I was short one coupler so il pick that up tomorrow from a performance improvement shop
The hahn kit i bought off ebay came with piping designed for a side mount intercooler instead of a front... I thought i was going to be spending a bunch of money on the piping just cause i wanted 2 1/4 staneless steel.... Lucky for my the Barrie Automotive Flea market was the same weekend = ) ... I picked a bunch of piping for only $5 per bend... + the guy gave me a discount cause i was a student... Worked out well
I started taking apart the interior so i can fit my new carpet in.. I got a ordered a royal black carpet from custom auto carpets on ebay.... Great quality and fit.. I did have to modify it a bit tho
Now that the center console was out I decided to replace the stock shifter as well with a knock-off B&M short throw shifter that i bought off of ebay... It reduced the short throw by almost half
I just took the stock carpet out and put it over the aftermarket one to see how it fit..
This is what it looked like when i first placed it in.. I had some trimming to do in order for the door sills and console to fit.. I also had to cut a few holes for the chair mounts, seat belts etc
The before and after..
I just put the first seat in and finished installing most of the panels
Finished = ) I also switched the the gross grey cloth rear seats with the black leather ones from a 98 GSX.. and i have awesome advice for anyone that wants a clean, new looking, awesome interior.. CARPET swap.. Best thing ever.. I was so surprised how much the carpet changed / enhanced my interior... Looks like a brand new car + even smells like one = )
This is right after i put the bumper on.. I didnt have to trim the bumper at all.. I had JUST enough room for the intercooler to fit
Finally drove it out of my garage..
More Pics:
