Page 1 - Intro(You Are Here)
Page 2 - Rotors
Page 3 - Videos of 03/04 Cobra Terminators
2004 Cobra Terminator
(1 of 308) Black Convertible Cobra's w/ Charcoal Interior made in 2004
BilletFlow 2.76" Non-Slip Supercharger pulley(12-14psi), Accufab Oval Throttle Body & Plenum, Steeda Strut Tower Brace, K&N FIPK, Custom Ram Air Induction, Redline Water Wetter in Intercooler and Radiator, Hypertech 160degree thermostat, Royal Purple Engine Oil, DiabloSport Predator Tune, BBK O/R X-Pipe, Flowmaster Catback exhaust,
Custom Painted Intercooler with same script as the cobra script on rear bumper.
Steeda Sport Springs,Steeda Ball Joints,Steeda Bumpsteer Kit, Crossed Drilled and Curved Slotted Rotors, Kevlar Ceramic Brake Pads, Granatelli Motorsports Caster/Camber Plates, Maximum Motorsports Strut Boot Cover(Replaces Stock Boot for more alignment adjustability,Painted Calipers and Pads.
Steeda Sport Springs, AirLift Drag Launch Air Bags, Cross Drilled and Curved Slotted Rotors with Kevlar Ceramic High Performance Brake Pads. (Pic on right shows valve to fill drag launch air bags)
Steeda Rear Strut Tower Brace
Roush Stylin Bar with Led 3rd Brake Light and Hurst Shift Knob
Eyes on Cobra's painted Red.
Flowmaster Catback Exhaust System with BBK Offroad X-Pipe and Steeda IRS Brace
New Custom Plates KLR SVT -> KILLER SVT
PIONEER AVIC-D3
HACK MODIFICATIONS - More designs to come check page 4 for templates. All these were designed by me and installed.
Pics do not do Navigation resolution any justice they look amazing in person.
This screen pops up when car turns on and Navigation System is Loading.
Screen on left pops up as background on radio,cd,sirius,xm radio,ipod,dvd and Blue Tooth Cell Phone Screen,etc.
Screen on right pops up only on Vehicle Dynamics,Measures Acceleration G's, Side G's and Speedo. Both in Digital and Analog. Guages can be changed to show volts, compass, time etc. Gauges are surprisingly very accurate and speedo reads past 160mph to 180mph+ in analog and digital.
Screen on left pops up as background in navigation screens.
New Track Edition Curved Slotted and Chamferred Dimpled Rottors w/Zinc Anti Corrosive Finish
Just purchased used 2weeks ago Nov 14, 2008 with 20,800 miles. Was pretty much completely stock when I bought this car except for wiindow tint and sequential tail lights.
As soon as I purchased vehicel I started modding vehicle. Heres a list of parts installed so far.
Mods Done Before I purchased:
1-Window Tint
2-Sequential Tail Lights
3-Kumho Ecsta SPT 275/40/17
Mods Done After I purchased:
1-8000K 9007 HID's Bi-Xenon Headlights (Hi/Lo) Beam
2-8000K H10 HID's Foglights
3-K&N FIPK
4-Pioneer AVIC D3 Touch Screen DVD/Navigation System/Vehicle Dynamics
5-BBK Offroad X-Pipe (No Cats) w/ Stock Mufflers
6-COBRA Chrome Rear Bumper Decal
7-Royal Purple High Performance 5w20 Engine Oil
8-Nitto 555R Drag Radial 315/35/17 on Rear Wheels
9-Diablo Sport Predator Tuner(Performance Tune)
10-Gray Paint Removed from Inner Rims to Expose Chrome
11- 4" Aluminum Flex Tube(From hole next to Passenger Fog Light through fender to K&N FIPK) Cooler Air to Filter
12-Steeda 3-Point Strut Tower Brace
13-Valve Cover Filter & Intake Plug(Eliminates PCV Hose to Air filter) This eliminates oil being sucked into intake and reduces air intake temperature.
14-Red Line Water Wetter(Intercooler Tank) Reduces Intercooler liquid temp by 10 degrees reducing intake temps.
15-Redline Water Wetter(Radiator Resevior) Reduces radiator temp by 10 degrees
16-Accufab Oval Single Blade Throttle Body & Plenum
17-Dymax Kevlar Ceramic High Performance Brake Pads Front & Rear
18-Track Edition Curve Slotted/Chamferred Dimpled Rotors Front & Rear w/ Anti Corrisive Finish
19-2.5% Window Tint
20-Cobra Convertible 470lb Springs Removed and Cobra Coupe 600lb Springs Installed
Parts Purchased but Waiting to be installed (Need a Supercharger Pulley Removal/Installation Tool)
1-Billet Flow 2.76" Supercharger Pulley Adds 6-7psi over Stock 3.65" Pulley.
(Vehicle Currently at 10psi so should bump it up to 16psi with pulley)
2- Goodyear Gatorback Belt 73.5" long (Part# 4080735)
"Smaller belt to prevent belt slipping due to smaller pulley. Stock belt 75" long (Part# 4080750)"
Video of My Car WOT 1st & 2nd Gear (Supercharger Whine)
2.5% Tint on Windows
Nitto Drag Radials 315/35/17
I removed Gray Coating on inner rim that covered Chrome. I think it makes rims look nicer and also makes them look a little wider when installed. I will take pics of them installed tommorrow as it is to dark right now to see them clearly.
Redline Water Wetter in Intercooler tank and Radiator Resevior. Reduces intercooler temp by 10 degrees reducing intake temps.
4" Aluminum Duct Running from Hole next to Fog Light up through fender facing filter for a cooler denser air charge. I hooked up my DiabloSport Predator Tuner and checked Intake Temp without 4" aluminum duct then with the aluminum duct, the result was a 5-15F degree drop in intake temperature depending on speed under normal driving conditions. Of course if its colder outside you can expect an even lower drop in intake temperature. I can feel the difference, especially at higher speeds and this is under normal driving conditions. At WOT whatever the air temperature is outside thats what the air temperature entering engine will be. As everyone knows these stock superchargers recirculate the air to prevent supercharger cavitation when not in boost so under normal driving conditions you may not notice anything but under WOT you will. You can hear a slight whistle now when you step on gas, it almost sounds like a blow off valve.
Pic of 4" aluminum duct running up through fender to K&N Air Filter and Royal Purple which I put in engine.
Not my car in the video below, I just thought people might like to watch it.
04 Cobra Terminator(606HP) VS. Ford GT(550HP)
Cobra Terminator Beating a Ford GT
Cant wait till i make my Cobra Terminator this fast.
Future Mods
1-2.8" Billet Flow Non-Slip Supercharger Pulley
2- Billet Flow 4-Piece Idler Pulley Kit
3-Billet Flow IRS Cover Brace(Fixes Cobra's weakness where Cover usually brakes)
4-SLP LoudMouth Exhaust System
5-Cervinis Light Bar
6-Cervinis Speedster Covers
7- Pro 5.0 Short Throw Shifter
8-Ray Hilton Boost-Overlays(Allows stock guage to read up to 16psi)
9-Stiegemeier Stage 5 Portet Supercharger
10-NGK Iridium Spark Plugs
11- Custom True Fire Airbrush Paint Job after Hood Vents
12-LFP Supertank Intercooler Resevior (5x Fluid Capacity)Lowers Intercooler Temp
13-LFP Expansion Radiator Resevior
14- Crossed Drilled and Slotted Rotors
15-Killer Chiller System (Guaranteed to lower Inter Cooler Temp by 50-55 degrees)
16-Goodyear Gatorback Belt
17-SCT BA3000 Big Air MAF Meter
18-FAST Wide-Band Dual Sensor Air/Fuel Meter with built-in Data Logger
19-Kenny Brown Rear Shock Tower Brace
20-Kenny Brown Extreme Matrix Subframe System
21-LFP Extreme Dual Pass Intercooler Heat Exchanger
22-LFP Billet Heat Extractor Hood Vents
23-Detriot Locker Tru-Trac
24- Level 5 Halfshafts w/ Chromoly inner CV's (Can Handle up to 900hp)
25-LFP 8" Drive Shaft Safety Loop
26-Ford Racing 3.73 Gears
27-C&L Polished Intake Tube
2004 Cobra Specs Card
2004 Cobra Terminator Production Numbers
Links for Parts
www.lightningforceperformance.com
http://www.rpmoutlet.com/03cobra.htm
Races Won
Stock 06 Corvette(Beat Bad)
Stock 08 Corvette Z06(Beat Slightly)
08 Mustang GT w/mods(Aftermarket exhaust,CAI, tune) (Beat Bad)
02 Mustang GT w/ mods (CAI,O/R H-Pipe,Flowmaster Catback Exhaust,BBK Pulleys) (Beat Bad)
5.0L Mustang(Year Unkown) Mods Unkown but from what I can tell was highly modded with cam and aftermarket exhaust. (Beat Bad)
Mazda Miata(Year Unkown) Manaul, all Mods uknown (Exhaust, Turbo/s) (Beat bad)
Races Lost
08 Viper Roadster(Beat Slightly)
Page 1 - Intro(You Are Here)
Page 2 - Rotors
Page 3 - Videos of 03/04 Cobra Terminators
